AOZ5312UQIElectrical Characteristics(4) TJ = 0°C to 150°C, VIN = 12V, VOUT = 1V, PVCC = VCC = DISB# = 5V, unless otherwise specified. Min/Max values are guaranteed by test, design, or statistical correlation. SymbolParameterConditionsMin.Typ.Max.UnitsGATE DRIVER TIMINGS tPDLU PWM to High-Side Gate PWM: H L, VSWH: H L 30 ns tPDLL PWM to Low-Side Gate PWM: L H, GL: H L 25 ns tPDHU LS to HS Gate Deadtime GL: H L, GH(6): L H 15 ns tPDHL HS to LS Gate Deadtime VSWH: H 1V, GL: L H 13 ns tTSSHD Tri-State Shutdown Delay PWM: L VTRI, GL: H L and PWM: H VTRI, VSWH: H L 25 ns tTSEXIT Tri-State Propagation Delay PWM: VTRI H, VSWH: L H PWM: VTRI L, GL: L H 35 ns tLGMIN LS Minimum On Time SMOD# = L 350 ns THERMAL NOTIFICATION TJTHWN Junction Thermal Threshold Temperature Rising 150 °C TJHYST Junction Thermal Hysteresis 30 °C VTHWN THWN Pin Output Low ITHWN = 0.5mA 60 mV RTHWN THWN Pull-Down Resistance 120 Ω Notes: 4. All voltages are specified with respect to the corresponding AGND pin. 5. Characterization value. Not tested in production. 6. GH is an internal pin. Rev. 1.0 July 2019 www.aosmd.com Page 7 of 18