Datasheet LT1784 (Analog Devices) - 5

HerstellerAnalog Devices
Beschreibung2.5MHz, Over-The-Top Low Power, Rail-to-Rail Input and Output Op Amp in SOT-23
Seiten / Seite12 / 5 — ELECTRICAL CHARACTERISTICS. The. denotes the specifi cations which apply …
Dateiformat / GrößePDF / 204 Kb
DokumentenspracheEnglisch

ELECTRICAL CHARACTERISTICS. The. denotes the specifi cations which apply over the specifi ed

ELECTRICAL CHARACTERISTICS The denotes the specifi cations which apply over the specifi ed

Modelllinie für dieses Datenblatt

Textversion des Dokuments

LT1784
ELECTRICAL CHARACTERISTICS The
l
denotes the specifi cations which apply over the specifi ed temperature range, otherwise specifi cations are at TA = 25°C. VS = ±5V, VCM = 0V, VOUT = 0V, for the 6-lead part VPIN5 = V–, pulse power tested unless otherwise specifi ed. SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
VIL SHDN Pin Input Low Voltage VS = ±5V (Note 8) l –4.7 V VIH SHDN Pin Input High Voltage VS = ±5V (Note 8) l –3 V tON Turn-On Time VPIN5 = 0V to –5V, RL = 10k (Note 8) l 18 μs tOFF Turn-Off Time VPIN5 = –5V to 0V, RL = 10k (Note 8) l 2.2 μs GBW Gain Bandwidth Product f = 5kHz 1.55 2.6 MHz 0°C ≤ TA ≤ 70°C l 1.30 MHz –40°C ≤ TA ≤ 85°C l 1.20 MHz SR Slew Rate AV = –1, RL = ∞, VO = ±4V, Measured at VO = ±2V 1.3 2.2 V/μs 0°C ≤ T l A ≤ 70°C 1.2 V/μs –40°C ≤ T l A ≤ 85°C 1.1 V/μs FPBW Full-Power Bandwidth (Note 9) VOUT = 8VP-P 94 kHz tS Settling Time VS = 5V, ΔVOUT = 4V to 0.1%, AV = 1 3.4 μs
Note 1:
Stresses beyond those listed under Absolute Maximum Ratings
Note 6:
This specifi cation implies a typical input offset voltage of 5.7mV at may cause permanent damage to the device. Exposure to any Absolute VCM = 18V and a maximum input offset voltage of 18mV at VCM = 18V. Maximum Rating condition for extended periods may affect device
Note 7:
This parameter is not 100% tested. reliability and lifetime.
Note 8:
Specifi cations apply to 6-lead SOT-23 with shutdown.
Note 2:
A heat sink may be required to keep the junction temperature
Note 9:
Full-power bandwidth is calculated from the slew rate. below absolute maximum. FPBW = SR/2πVP.
Note 3:
VS = 5V limits are guaranteed by correlation to VS = 3V and
Note 10:
The LT1784C is guaranteed functional over the operating VS = ±5V or VS = ±9V tests. temperature range –40°C to 85°C.
Note 4:
VS = 3V limits are guaranteed by correlation to VS = 5V and
Note 11:
The LT1784C is guaranteed to meet specifi ed performance from VS = ±5V or VS = ±9V tests. 0°C to 70°C. The LT1784C is designed, characterized and expected to
Note 5:
Guaranteed by correlation to slew rate at VS = ±5V, and GBW at meet specifi ed performance from –40°C to 85°C but is not tested or QA VS = 5V and VS = ±5V tests. sampled at these temperatures. LT1784I is guaranteed to meet specifi ed performance from –40°C to 85°C.
TYPICAL PERFORMANCE CHARACTERISTICS Output Voltage Supply Current vs Supply Voltage Minimum Supply Voltage vs Large Input Voltage
700 400 5 VS = 5V, 0V 650 300 4 600 TA = 125°C 200 550 TA = 25°C 100 T 3 T A = –55°C A = 125°C (V) 500 0 T OUT Y CURRENT (μA) A = 25°C V 2 5V 450 T –100 A = –55°C SUPPL V + IN 400 –200 1 – 350 INPUT OFFSET VOLTAGE CHANGE (μV) –300 300 –400 0 2 4 6 8 10 12 14 16 18 1 2 3 4 5 –10 –6 –2 2 6 10 14 18 SUPPLY VOLTAGE (V) TOTAL SUPPLY VOLTAGE (V) VIN (V) 1784 G01 1784 G02 1784 G03 1784fa 5