Datasheet SN8P2501 (SONiX Technology) - 3
| Hersteller | SONiX Technology |
| Beschreibung | 8-Bit Micro Controller |
| Seiten / Seite | 11 / 3 — SN8P2501. V1.0. SN8IDE V1.99I. 1 CODE. OPTION. Code Option. Content. … |
| Dateiformat / Größe | PDF / 131 Kb |
| Dokumentensprache | Englisch |
SN8P2501. V1.0. SN8IDE V1.99I. 1 CODE. OPTION. Code Option. Content. Function Description
Modelllinie für dieses Datenblatt
Textversion des Dokuments
SN8P2501
使用注意事項
V1.0 SN8P2501
使用注意事項
適用對象
:
客戶或代理商
SN8P2501 為 SONIX 新開發的 14 pin、1T (one clock per machine cycle) 8-bit MCU，內建 16MHz RC 震盪器， 最多有 12 I/O 可用，並具備優異的抗雜訊能力。在系統開發階段，軟､硬體注意事項請參考下文敘述，開發軟件 請用 “
SN8IDE V1.99I
” 或之後版本。(註：包裝正印 SN8PEV2501 為工程樣品，程式宣告一樣為 CHIP SN8P2501)。
1 CODE OPTION
：
Code Option Content Function Description
Low cost RC for external high clock oscillator and XOUT becomes to general Ext_RC purpose I/O (P1.2). Low frequency, power saving crystal (e.g. 32.768KHz) for external high clock 32K_X’tal oscillator. 12M_X’tal High speed crystal /resonator (e.g. 12MHz) for external high clock oscillator. High_Clk 4M_X’tal Standard crystal /resonator (e.g. 3.58M) for external high clock oscillator. Internal high RC 16MHz and external oscillator pins as general purpose I/O (XIN IHRC_16M to P1.3, XOUT to P1.2). Internal high RC 16MHz with RTC function and external oscillator pins connect IHRC_RTC with 32.768KHz crystal to generating real time clock. Enable Enable noise filter to enhance noise immunity performance. Noise_Filter Disable Disable noise filter. Always_On Watchdog timer always on. Watch_Dog Disable Disable Watchdog function. Fosc/1 Instruction cycle is oscillator clock. Fosc/2 Instruction cycle is 2 oscillator clocks. Fosc/4 Instruction cycle is 4 oscillator clocks. Fcpu Fosc/8 Instruction cycle is 8 oscillator clocks. Fosc/16 Instruction cycle is 16 oscillator clocks. http://www.DataSheet4U.net/ Fosc/32 Instruction cycle is 32 oscillator clocks. Fosc/64 Instruction cycle is 64 oscillator clocks. -2MHz Internal high RC 16MHz typical frequency - 2MHz. -1MHz Internal high RC 16MHz typical frequency -1MHz. 16M_IHRC Normal Internal high RC 16MHz typical frequency. +1MHz Internal high RC 16MHz typical frequency + 1MHz. +2MHz Internal high RC 16MHz typical frequency + 2MHz. Reset Enable External reset pin. Reset_Pin Disable External reset pin and the pin is as input only pin P1.1 without pull-up P11 resister. Enable Enable ROM code Security function. Security Disable Disable ROM code Security function. Enable Enable Low Power function to save Operating current. Low Power Disable Normal. 本資料為松翰科技股份有限公司專有之財產，非經書面許可不准透露或使用本資料，亦不准複印複製或轉變成任何其他形式使用。
The information contained herein is the exclusive property of SONiX technology Co., Ltd. and shall not be distributed
，
reproduced
，
or disclosed in whole or in part without prior written permission of SONiX technology Co., Ltd.
Page3 datasheet pdf - http://www.DataSheet4U.net/ Document Outline CODE OPTION： Fcpu code option： Noise Filter code option： Low Power： Watchdog操作注意事項： BIT TEST I/O： @B0TS0巨集程式： @B0TS1巨集程式： SN8P2501 S8KD-2 ICE 仿真注意事項表 P0.0 OUTPUT MODE EMULATION IN S8KD-2 ICE： @P00_MODE巨集說明： @P00_OUT巨集說明： 設定 PWM DUTY： ICE_MODE設置說明： @PWM0_MAX_DUTY巨集說明： PEDGE設定： @P00_EDGE巨集說明： B0BSET FP00IEN 其他巨集使用注意事項
使用注意事項
V1.0 SN8P2501
使用注意事項
適用對象
:
客戶或代理商
SN8P2501 為 SONIX 新開發的 14 pin、1T (one clock per machine cycle) 8-bit MCU，內建 16MHz RC 震盪器， 最多有 12 I/O 可用，並具備優異的抗雜訊能力。在系統開發階段，軟､硬體注意事項請參考下文敘述，開發軟件 請用 “
SN8IDE V1.99I
” 或之後版本。(註：包裝正印 SN8PEV2501 為工程樣品，程式宣告一樣為 CHIP SN8P2501)。
1 CODE OPTION
：
Code Option Content Function Description
Low cost RC for external high clock oscillator and XOUT becomes to general Ext_RC purpose I/O (P1.2). Low frequency, power saving crystal (e.g. 32.768KHz) for external high clock 32K_X’tal oscillator. 12M_X’tal High speed crystal /resonator (e.g. 12MHz) for external high clock oscillator. High_Clk 4M_X’tal Standard crystal /resonator (e.g. 3.58M) for external high clock oscillator. Internal high RC 16MHz and external oscillator pins as general purpose I/O (XIN IHRC_16M to P1.3, XOUT to P1.2). Internal high RC 16MHz with RTC function and external oscillator pins connect IHRC_RTC with 32.768KHz crystal to generating real time clock. Enable Enable noise filter to enhance noise immunity performance. Noise_Filter Disable Disable noise filter. Always_On Watchdog timer always on. Watch_Dog Disable Disable Watchdog function. Fosc/1 Instruction cycle is oscillator clock. Fosc/2 Instruction cycle is 2 oscillator clocks. Fosc/4 Instruction cycle is 4 oscillator clocks. Fcpu Fosc/8 Instruction cycle is 8 oscillator clocks. Fosc/16 Instruction cycle is 16 oscillator clocks. http://www.DataSheet4U.net/ Fosc/32 Instruction cycle is 32 oscillator clocks. Fosc/64 Instruction cycle is 64 oscillator clocks. -2MHz Internal high RC 16MHz typical frequency - 2MHz. -1MHz Internal high RC 16MHz typical frequency -1MHz. 16M_IHRC Normal Internal high RC 16MHz typical frequency. +1MHz Internal high RC 16MHz typical frequency + 1MHz. +2MHz Internal high RC 16MHz typical frequency + 2MHz. Reset Enable External reset pin. Reset_Pin Disable External reset pin and the pin is as input only pin P1.1 without pull-up P11 resister. Enable Enable ROM code Security function. Security Disable Disable ROM code Security function. Enable Enable Low Power function to save Operating current. Low Power Disable Normal. 本資料為松翰科技股份有限公司專有之財產，非經書面許可不准透露或使用本資料，亦不准複印複製或轉變成任何其他形式使用。
The information contained herein is the exclusive property of SONiX technology Co., Ltd. and shall not be distributed
，
reproduced
，
or disclosed in whole or in part without prior written permission of SONiX technology Co., Ltd.
Page3 datasheet pdf - http://www.DataSheet4U.net/ Document Outline CODE OPTION： Fcpu code option： Noise Filter code option： Low Power： Watchdog操作注意事項： BIT TEST I/O： @B0TS0巨集程式： @B0TS1巨集程式： SN8P2501 S8KD-2 ICE 仿真注意事項表 P0.0 OUTPUT MODE EMULATION IN S8KD-2 ICE： @P00_MODE巨集說明： @P00_OUT巨集說明： 設定 PWM DUTY： ICE_MODE設置說明： @PWM0_MAX_DUTY巨集說明： PEDGE設定： @P00_EDGE巨集說明： B0BSET FP00IEN 其他巨集使用注意事項