Datasheet MTP50P03HDLG (ON Semiconductor) - 2

HerstellerON Semiconductor
BeschreibungPower MOSFET 50 Amps, 30 Volts, Logic Level P−Channel TO−220
Seiten / Seite8 / 2 — MTP50P03HDLG. ELECTRICAL CHARACTERISTICS. Characteristic. Symbol. Min. …
Dateiformat / GrößePDF / 113 Kb
DokumentenspracheEnglisch

MTP50P03HDLG. ELECTRICAL CHARACTERISTICS. Characteristic. Symbol. Min. Typ. Max. Unit. OFF CHARACTERISTICS. ON CHARACTERISTICS

MTP50P03HDLG ELECTRICAL CHARACTERISTICS Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS ON CHARACTERISTICS

Modelllinie für dieses Datenblatt

Textversion des Dokuments

link to page 2 link to page 2 link to page 2 link to page 2 link to page 2
MTP50P03HDLG ELECTRICAL CHARACTERISTICS
(TJ = 25°C unless otherwise noted)
Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage (Cpk ≥ 2.0) (Note 3) V(BR)DSS Vdc (VGS = 0 Vdc, ID = 250 mAdc) 30 − − Temperature Coefficient (Positive) − 26 − mV/°C Zero Gate Voltage Drain Current IDSS mAdc (VDS = 30 Vdc, VGS = 0 Vdc) − − 1.0 (VDS = 30 Vdc, VGS = 0 Vdc, TJ = 125°C) − − 10 Gate−Body Leakage Current (VGS = ± 15 Vdc, VDS = 0 Vdc) IGSS − − 100 nAdc
ON CHARACTERISTICS
(Note 1) Gate Threshold Voltage (Cpk ≥ 3.0) (Note 3) VGS(th) Vdc (VDS = VGS, ID = 250 mAdc) 1.0 1.5 2.0 Threshold Temperature Coefficient (Negative) − 4.0 − mV/°C Static Drain−to−Source On−Resistance (Cpk ≥ 3.0) (Note 3) RDS(on) W (VGS = 5.0 Vdc, ID = 25 Adc) − 0.020 0.025 Drain−to−Source On−Voltage (VGS = 10 Vdc) VDS(on) Vdc (ID = 50 Adc) − 0.83 1.5 (ID = 25 Adc, TJ = 125°C) − − 1.3 Forward Transconductance gFS mhos (VDS = 5.0 Vdc, ID = 25 Adc) 15 20 −
DYNAMIC CHARACTERISTICS
Input Capacitance Ciss − 3500 4900 pF (VDS = 25 Vdc, VGS = 0 Vdc, Output Capacitance C f = 1.0 MHz) oss − 1550 2170 Transfer Capacitance Crss − 550 770
SWITCHING CHARACTERISTICS
(Note 2) Turn−On Delay Time td(on) − 22 30 ns Rise Time (V t DD = 15 Vdc, ID = 50 Adc, r − 340 466 V Turn−Off Delay Time GS = 5.0 Vdc, RG = 2.3 W) td(off) − 90 117 Fall Time tf − 218 300 Gate Charge QT − 74 100 nC (See Figure 8) (V Q DS = 24 Vdc, ID = 50 Adc, 1 − 13.6 − VGS = 5.0 Vdc) Q2 − 44.8 − Q3 − 35 −
SOURCE−DRAIN DIODE CHARACTERISTICS
Forward On−Voltage V Vdc (I SD S =50 Adc, VGS = 0 Vdc) − 2.39 3.0 (IS = 50 Adc, VGS = 0 Vdc, TJ = 125°C) − 1.84 − Reverse Recovery Time trr − 106 − ns (See Figure 15) (I t S = 50 Adc, VGS = 0 Vdc, a − 58 − dIS/dt = 100 A/ms) tb − 48 − Reverse Recovery Stored Charge QRR − 0.246 − mC
INTERNAL PACKAGE INDUCTANCE
Internal Drain Inductance LD nH (Measured from contact screw on tab to center of die) − 3.5 − (Measured from the drain lead 0.25″ from package to center of die) − 4.5 − Internal Source Inductance LS nH (Measured from the source lead 0.25″ from package to source bond pad) − 7.5 − 1. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%. 2. Switching characteristics are independent of operating junction temperature. 3. Reflects typical values. Max limit − Typ Cpk = 3 x SIGMA
www.onsemi.com 2