Datasheet IRLHM620PbF (Infineon) - 8
| Hersteller | Infineon |
| Beschreibung | HEXFET Power MOSFET |
| Seiten / Seite | 9 / 8 — PQFN 3.3 x 3.3 Part Marking. XXXX. ?YWW?. XXXXX. PQFN 3.3 x 3.3 Tape and … |
| Dateiformat / Größe | PDF / 542 Kb |
| Dokumentensprache | Englisch |
PQFN 3.3 x 3.3 Part Marking. XXXX. ?YWW?. XXXXX. PQFN 3.3 x 3.3 Tape and Reel. REEL DIMENSIONS. TAPE DIMENSIONS
Modelllinie für dieses Datenblatt
Textversion des Dokuments
IRLHM620PbF
PQFN 3.3 x 3.3 Part Marking
INTERNATIONAL RECTIFIER LOGO DATE CODE
XXXX
PART NUMBER ASSEMBLY SITE CODE
?YWW?
MARKING CODE (Per Marking Spec) (Per SCOP 200-002)
XXXXX
LOT CODE PIN 1 (Eng Mode - Min last 4 digits of EATI#) (Prod Mode - 4 digits of SPN code) IDENTIFIER Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
PQFN 3.3 x 3.3 Tape and Reel
REEL DIMENSIONS TAPE DIMENSIONS
DIMENSION (MM) DIMENSION (INCH) CODE MIN MAX MIN MAX Ao 3.50 3.70 .138 .146 Bo 3.50 3.70 .138 .146 Ko 1.10 1.30 .043 .051 P1 7.90 8.10 .311 .319
QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE
W 11.80 12.20 .465 .480 W 12.30 12.50 .484 .492 1 Qty 4000 Reel Diameter 13 Inches CODE DESCRIPTION Ao Dimension design to accommodate the component width Bo Dimension design to accommodate the component lenght Ko Dimension design to accommodate the component thickness W Overall width of the carrier tape P1 Pitch between successive cavity centers Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 8 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback September 25, 2015
PQFN 3.3 x 3.3 Part Marking
INTERNATIONAL RECTIFIER LOGO DATE CODE
XXXX
PART NUMBER ASSEMBLY SITE CODE
?YWW?
MARKING CODE (Per Marking Spec) (Per SCOP 200-002)
XXXXX
LOT CODE PIN 1 (Eng Mode - Min last 4 digits of EATI#) (Prod Mode - 4 digits of SPN code) IDENTIFIER Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
PQFN 3.3 x 3.3 Tape and Reel
REEL DIMENSIONS TAPE DIMENSIONS
DIMENSION (MM) DIMENSION (INCH) CODE MIN MAX MIN MAX Ao 3.50 3.70 .138 .146 Bo 3.50 3.70 .138 .146 Ko 1.10 1.30 .043 .051 P1 7.90 8.10 .311 .319
QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE
W 11.80 12.20 .465 .480 W 12.30 12.50 .484 .492 1 Qty 4000 Reel Diameter 13 Inches CODE DESCRIPTION Ao Dimension design to accommodate the component width Bo Dimension design to accommodate the component lenght Ko Dimension design to accommodate the component thickness W Overall width of the carrier tape P1 Pitch between successive cavity centers Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 8 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback September 25, 2015