GLF741304.5A Power Mux Switch with Auto & Manual Input SelectionProduct SpecificationDESCRIPTIONFEATURES Two-Input and Single-Output Power The GLF74130 IQSmartTM is an advanced technology Multiplexer Switch fully integrated power path load switch with the ability Automatic and Manual Input Selection to automatically select between two input sources Modes depending on the input voltage level of each source. The power path switch is targeted for the data Supply Voltage Range : 1.5 V to 5.5 V storage and mobile markets and is therefore RON = 20 mΩ Typ. at 5.5 VIN1 or VIN2 available as a chip scale package utilizing 12 bumps 4.5 A Continuous Output Current Capability in a 1.27 mm x 1.67 mm x 0.55 mm die size to deliver Per Channel the highest performance lowest cost power path Ultra-Low Supply Current at Operation switch solution in the industry. IQ : 4 uA Typ at 5.5 VIN The GLF74130 has a built-in reverse current Ultra-Low Stand-by Current blocking protection. When both switches are at the ISD : 50 nA Typ at 5.5 VIN off mode, the GLF74130 prevents the reverse Reverse Current Blocking when Disabled current from a higher output voltage to the input side. Operating Temperature Range: -40 to 85 °C The EN pin can be used along with the SEL pin to HBM: 6 kV, CDM: 2 kV control the switches of the GLF74130. By the 1.27 mm x 1.67 mm x 0.55 mm, 12 Bump combination of these two pins, one of input source Wafer Level Chip Scale Package selection modes is set among the automatic, VIN1, or VIN2 selection. APPLICATIONS IoT Tracking System Smart Devices Communication / Network System Subsystem with Backup Power PACKAGEVIN1VIN1VIN1VIN1VIN1VIN1A1A2A3A3A2A1VOUTVOUTVOUTVOUTVOUTVOUTB1B2B3B3B2B1VIN2VIN2VIN2VIN2VIN2VIN2C1C2C3C3C2C1SELGNDENENGNDSELD1D2D3D3D2D1TOP VIEWBOTTOM VIEW 1.27 mm x 1.67 mm x 0.55 mm, 0.4 mm pitch