Datasheet BL-HRGB32K-3-TRB (American Bright) - 7
| Hersteller | American Bright |
| Beschreibung | RGB LED device with built-in IC |
| Seiten / Seite | 9 / 7 — BRIGHT LED ELECTRONICS CORP. IR-Reflow |
| Dateiformat / Größe | PDF / 1.5 Mb |
| Dokumentensprache | Englisch |
BRIGHT LED ELECTRONICS CORP. IR-Reflow
Modelllinie für dieses Datenblatt
Textversion des Dokuments
BRIGHT LED ELECTRONICS CORP.
BL-HRGB32K-3-TRB ●
IR-Reflow
RAMP-UP 3°c/s max Max260°C MAX10S 255°C 240°C 245°C 217°C 200°C 150°C 30 sec Max RAMP-UP 3°c/s max RAMP-DOWN 6°c/s max TEMPERATURE(°c) 60-120S 60-120S TIME(sec) 1、Avoid any external stress applied to the resin while the LEDs are at high temperature, especially during soldering. 2、Avoid rapid cooling or any excess vibration during temperature ramp-down process 3、Although the soldering condition is recommended above, soldering at the lowest possible temperature is feasible for the LEDs ●IRON Soldering 350℃ Within 3 sec, one time only. Ver1.0 Page: 7 of 9
BL-HRGB32K-3-TRB ●
IR-Reflow
RAMP-UP 3°c/s max Max260°C MAX10S 255°C 240°C 245°C 217°C 200°C 150°C 30 sec Max RAMP-UP 3°c/s max RAMP-DOWN 6°c/s max TEMPERATURE(°c) 60-120S 60-120S TIME(sec) 1、Avoid any external stress applied to the resin while the LEDs are at high temperature, especially during soldering. 2、Avoid rapid cooling or any excess vibration during temperature ramp-down process 3、Although the soldering condition is recommended above, soldering at the lowest possible temperature is feasible for the LEDs ●IRON Soldering 350℃ Within 3 sec, one time only. Ver1.0 Page: 7 of 9