Datasheet RP517x (Ricoh) - 7

link to page 7
RP517x
No.EA-519-190325
ELECTRICAL CHARACTERISTICS
The specifications surrounded by are guaranteed by design engineering at −40°C ≤ Ta ≤ 85°C.
RP517x Electrical Characteristics
(Ta = 25°C)
Symbol Parameter Condition Min. Typ. Max. Unit
VOUT Output Voltage VIN = VCE = 3.6 V −0.018 +0.018 V V I IN = VCE = VOUT = 5.5 V, Q Operating Quiescent Current 0.3 µA VSET = 0.6 V, at rest ISTANDBY Standby Current VIN = 5.5 V, VCE = 0 V 0.01 0.5 µA ICEH CE Pin Input Current, high VIN = VCE = 5.5 V −0.025 0 0.025 µA ICEL CE Pin Input Current, low VIN = 5.5 V, VCE = 0 V −0.025 0 0.025 µA VOUT pin input current, IVOUTH V high IN = VOUT = 5.5 V, VCE = 0 V −0.025 0 0.025 µA VOUT pin input current, IVOUTL V low IN = 5.5 V, VCE = VOUT = 0 V −0.025 0 0.025 µA Auto-discharge NMOS RDISN V On-state Resistance (1) IN = 3.6 V, VCE = 0 V 60 Ω VCEH CE Pin Input Voltage, high 1.8 V ≤ VIN ≤ 5.5 V 1.0 V VCEL CE Pin Input Voltage, low 1.8 V ≤ VIN ≤ 5.5 V 0.4 V RP517Z VIN = 3.6 V, ILX = −100 mA 0.15 Ω RONP PMOS on-resistance RP517K VIN = 3.6 V, ILX = −100 mA TBD Ω RP517H VIN = 3.6 V, ILX = −100 mA TBD Ω RP517Z VIN = 3.6 V, ILX = −100 mA 0.15 Ω RONN NMOS on-resistance RP517K VIN = 3.6 V, ILX = −100 mA TBD Ω RP517H VIN = 3.6 V, ILX = −100 mA TBD Ω tSTART Soft-start time VIN = VCE = 3.6 V 10 ms ILXLIM LX current limit VIN = VCE = 3.6 V 300 580 mA VUVLOF V Undervoltage lockout IN = VCE, falling 1.40 1.50 1.65 V (UVLO) threshold voltage VUVLOR VIN = VCE, rising 1.55 1.65 1.80 V All test items listed under Electrical Characteristics are done under the pulse load condition (Tj ≈ Ta = 25°C). Test circuit is operated with “Open Loop Control” (GND = 0 V), unless otherwise specified. (1) RP517xxx1D only 7