Datasheet LTC3405A-1.375 (Analog Devices) - 5
| Hersteller | Analog Devices |
| Beschreibung | 1.375V, 1.5MHz, 300mA Synchronous Step-Down Regulators in ThinSOT |
| Seiten / Seite | 12 / 5 — TYPICAL PERFOR A CE CHARACTERISTICS TA = 25. C unless otherwise noted. … |
| Dateiformat / Größe | PDF / 267 Kb |
| Dokumentensprache | Englisch |
TYPICAL PERFOR A CE CHARACTERISTICS TA = 25. C unless otherwise noted. (From Figure 1a). Load Step. PI FU CTIO S. RUN (Pin 1):
Modelllinie für dieses Datenblatt
Textversion des Dokuments
LTC3405A-1.375
W U TYPICAL PERFOR A CE CHARACTERISTICS TA = 25
°
C unless otherwise noted. (From Figure 1a) Load Step Load Step Load Step
V V OUT OUT 100mV/DIV 100mV/DIV AC AC VOUT COUPLED COUPLED 100mV/DIV AC COUPLED I I L L IL 200mA/DIV 200mA/DIV 200mA/DIV ILOAD I ILOAD LOAD 200mA/DIV 200mA/DIV 200mA/DIV V 20 IN = 3.6V µs/DIV V 20 V 20 IN = 3.6V µs/DIV IN = 3.6V µs/DIV ILOAD = 20mA TO 250mA I I LOAD = 20mA TO 250mA LOAD = 0mA TO 250mA PULSE SKIPPING MODE Burst Mode OPERATION Burst Mode OPERATION 3405A1375 G17 3405A1375 G18 3405A1375 G19
U U U PI FU CTIO S RUN (Pin 1):
Run Control Input. Forcing this pin above
VIN (Pin 4):
Main Supply Pin. Must be closely decoupled 1.5V enables the part. Forcing this pin below 0.3V shuts to GND, Pin 2, with a 2.2µF or greater ceramic capacitor. down the device. In shutdown, all functions are disabled
V
drawing <1µA supply current. Do not leave RUN floating.
OUT (Pin 5):
Output Voltage Feedback Pin. An internal resistive divider divides the output voltage down for com-
GND (Pin 2):
Ground Pin. parison to the internal 0.9V reference voltage.
SW (Pin 3):
Switch Node Connection to Inductor. This pin
MODE (Pin 6):
Mode Select Input. To select pulse skip- connects to the drains of the internal main and synchro- ping mode, tie to VIN. Grounding this pin selects Burst nous power MOSFET switches. Mode operation. Do not leave this pin floating. 3405a1375f 5
W U TYPICAL PERFOR A CE CHARACTERISTICS TA = 25
°
C unless otherwise noted. (From Figure 1a) Load Step Load Step Load Step
V V OUT OUT 100mV/DIV 100mV/DIV AC AC VOUT COUPLED COUPLED 100mV/DIV AC COUPLED I I L L IL 200mA/DIV 200mA/DIV 200mA/DIV ILOAD I ILOAD LOAD 200mA/DIV 200mA/DIV 200mA/DIV V 20 IN = 3.6V µs/DIV V 20 V 20 IN = 3.6V µs/DIV IN = 3.6V µs/DIV ILOAD = 20mA TO 250mA I I LOAD = 20mA TO 250mA LOAD = 0mA TO 250mA PULSE SKIPPING MODE Burst Mode OPERATION Burst Mode OPERATION 3405A1375 G17 3405A1375 G18 3405A1375 G19
U U U PI FU CTIO S RUN (Pin 1):
Run Control Input. Forcing this pin above
VIN (Pin 4):
Main Supply Pin. Must be closely decoupled 1.5V enables the part. Forcing this pin below 0.3V shuts to GND, Pin 2, with a 2.2µF or greater ceramic capacitor. down the device. In shutdown, all functions are disabled
V
drawing <1µA supply current. Do not leave RUN floating.
OUT (Pin 5):
Output Voltage Feedback Pin. An internal resistive divider divides the output voltage down for com-
GND (Pin 2):
Ground Pin. parison to the internal 0.9V reference voltage.
SW (Pin 3):
Switch Node Connection to Inductor. This pin
MODE (Pin 6):
Mode Select Input. To select pulse skip- connects to the drains of the internal main and synchro- ping mode, tie to VIN. Grounding this pin selects Burst nous power MOSFET switches. Mode operation. Do not leave this pin floating. 3405a1375f 5