Datasheet CD4098BMS (Intersil) - 7
| Hersteller | Intersil |
| Beschreibung | CMOS Dual Monostable Multivibrator |
| Seiten / Seite | 11 / 7 — TABLE 8. BURN-IN AND IRRADIATION TEST CONNECTIONS. OSCILLATOR. FUNCTION. … |
| Revision | 2017-12-22 |
| Dateiformat / Größe | PDF / 327 Kb |
| Dokumentensprache | Englisch |
TABLE 8. BURN-IN AND IRRADIATION TEST CONNECTIONS. OSCILLATOR. FUNCTION. OPEN. GROUND. VDD. -0.5V. 50kHz. 25kHz
Modelllinie für dieses Datenblatt
Textversion des Dokuments
CD4098BMS
TABLE 8. BURN-IN AND IRRADIATION TEST CONNECTIONS OSCILLATOR FUNCTION OPEN GROUND VDD 9V
-0.5V 50kHz 25kHz
Static Burn-In 1 6, 7, 9, 10 1-5, 8, 11-15 16 Note 1 Static Burn-In 2 6, 7, 9, 10 1, 8, 15 2-5, 11-14, 16 Note 1 Dynamic Burn- - 1, 4, 8, 12, 15 2, 14, 16 6, 7, 9, 10 5, 11 3, 13 In Note 1 Irradiation 2, 6, 7, 9, 10, 14 1, 8, 15 3-5, 11-13, 16 Note 2 NOTE: 1. Each pin except VDD and GND will have a series resistor of 10K 5%, VDD = 18V 0.5V 2. Each pin except VDD and GND will have a series resistor of 47K 5%; Group E, Subgroup 2, sample size is 4 dice/wafer, 0 failures, VDD = 10V 0.5V
TABLE 9. FUNCTIONAL TERMINAL CONNECTIONS VDD TO VSS TO INPUT PULSE TO OTHER TERM. NO. TERM. NO. TERM. NO. CONNECTIONS FUNCTION MONO 1 MONO 2 MONO 1 MONO 2 MONO 1 MONO 2 MONO 1 MONO 2
Leading Edge Trigger/ 3, 5 11, 13 4 12 Retriggerable Leading Edge Trigger/ 3 13 4 12 5-7 11-9 Non-Retriggerable Trailing Edge Trigger/ 3 13 4 12 5 11 Retriggerable Trailing Edge Trigger/ 3 13 5 11 4-6 12-10 Non-Retriggerable Unused Section 5 11 3, 4 12, 13 NOTES: 1. A retriggerable one-shot multivibrator has an output pulse width which is extended one full time period (TX) after application of the last trigger pulse. The minimum time between retriggering edges (or trigger and retrigger edges) is 40% of (TX). 2. A non-retriggerable one-shot multivibrator has a time period TX referenced from the application of the first trigger pulse.
INPUT PULSE TRAIN RETRIGGERABLE MODE PULSE WIDTH (+TR MODE) TX NON-RETRIGGERABLE MODE PULSE WIDTH (-TR MODE) TX
© Copyright Intersil Americas LLC 1999. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. For additional products, see www.intersil.com/en/products.html Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com FN3332 Rev 0.00 Page 7 of 11 December 1992
TABLE 8. BURN-IN AND IRRADIATION TEST CONNECTIONS OSCILLATOR FUNCTION OPEN GROUND VDD 9V
-0.5V 50kHz 25kHz
Static Burn-In 1 6, 7, 9, 10 1-5, 8, 11-15 16 Note 1 Static Burn-In 2 6, 7, 9, 10 1, 8, 15 2-5, 11-14, 16 Note 1 Dynamic Burn- - 1, 4, 8, 12, 15 2, 14, 16 6, 7, 9, 10 5, 11 3, 13 In Note 1 Irradiation 2, 6, 7, 9, 10, 14 1, 8, 15 3-5, 11-13, 16 Note 2 NOTE: 1. Each pin except VDD and GND will have a series resistor of 10K 5%, VDD = 18V 0.5V 2. Each pin except VDD and GND will have a series resistor of 47K 5%; Group E, Subgroup 2, sample size is 4 dice/wafer, 0 failures, VDD = 10V 0.5V
TABLE 9. FUNCTIONAL TERMINAL CONNECTIONS VDD TO VSS TO INPUT PULSE TO OTHER TERM. NO. TERM. NO. TERM. NO. CONNECTIONS FUNCTION MONO 1 MONO 2 MONO 1 MONO 2 MONO 1 MONO 2 MONO 1 MONO 2
Leading Edge Trigger/ 3, 5 11, 13 4 12 Retriggerable Leading Edge Trigger/ 3 13 4 12 5-7 11-9 Non-Retriggerable Trailing Edge Trigger/ 3 13 4 12 5 11 Retriggerable Trailing Edge Trigger/ 3 13 5 11 4-6 12-10 Non-Retriggerable Unused Section 5 11 3, 4 12, 13 NOTES: 1. A retriggerable one-shot multivibrator has an output pulse width which is extended one full time period (TX) after application of the last trigger pulse. The minimum time between retriggering edges (or trigger and retrigger edges) is 40% of (TX). 2. A non-retriggerable one-shot multivibrator has a time period TX referenced from the application of the first trigger pulse.
INPUT PULSE TRAIN RETRIGGERABLE MODE PULSE WIDTH (+TR MODE) TX NON-RETRIGGERABLE MODE PULSE WIDTH (-TR MODE) TX
© Copyright Intersil Americas LLC 1999. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. For additional products, see www.intersil.com/en/products.html Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com FN3332 Rev 0.00 Page 7 of 11 December 1992