Datasheet LT3587 (Analog Devices)
| Hersteller | Analog Devices |
| Beschreibung | High Voltage Monolithic Inverter and Dual Boost |
| Seiten / Seite | 24 / 1 — FEATURES. DESCRIPTION. Ideal for CCD, LCD, LED Backlight and OLED. … |
| Dateiformat / Größe | PDF / 410 Kb |
| Dokumentensprache | Englisch |
FEATURES. DESCRIPTION. Ideal for CCD, LCD, LED Backlight and OLED. Applications. Easy Generation of 15V (50mA), –8V (100mA) and
Modelllinie für dieses Datenblatt
Textversion des Dokuments
LT3587 High Voltage Monolithic Inverter and Dual Boost
FEATURES DESCRIPTION
n
Ideal for CCD, LCD, LED Backlight and OLED
The LT®3587 provides a one chip solution for applications
Applications
requiring two positive and one negative high voltage sup- n
Easy Generation of 15V (50mA), –8V (100mA) and
plies. The LT3587 input voltage range of 2.5V to 6V makes
20V (20mA) from a Li-Ion Cell
it ideal for various battery-powered systems. n
VVIN Range: 2.5V to 6V
A single resistor programs each of the three output voltage n
Wide Output Ranges: Up to 32V for the Boosts and
levels and the output current of Boost3. The intelligent soft-
Up to –32V for the Inverter
start allows for sequential soft-start of the Boost1 output n Output Disconnect for the Boost Channels followed by the negative output with a single capacitor. n Boost3 Allows Voltage Programming and/or Current Internal sequencing circuitry also disables the inverter until Programming for a ‘One Wire Current Source’ the Boost1 output has reached 87% of its fi nal value. n Overload Fault Protection with Fault I/O Pin Indicator n Combined Soft-Start and Enable Pins The LT3587 integrates all the power switches, soft-start, n Small 20-Pin 3mm × 3mm QFN Package and output-disconnect circuits into a small 3mm × 3mm QFN package. This high level of integration combined
APPLICATIONS
with small external components makes the LT3587 ideal for space constrained applications. n Digital Still and Video Cameras L, LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. n Scanner and Display Systems n PDA, Cellular Phones and Handheld Computers n LED Backlight and OLED Display Drivers n CCD Imager Bias n General High Voltage Supply Bias
TYPICAL APPLICATION Li-Ion Powered Supply for CCD Imager and Six White Backlight LEDs
VVIN 2.5V TO 6V 10μH 15μH
Effi ciency Curve
1μF 90 800 2.2μF CDD+ = 50mA 10μF CDD+ SW3 V SW1 IN 85 CDD– = 100mA 700 CAP3 CAP1 CCD POSITIVE LED = 20mA POWER DISSIP 15V, 50mA I 80 600 FB3 VOUT1 8.06k 1M ALL CHANNELS GND FB1 75 500 ENABLED LT3587 2.7pF 70 400 A CDD– TION (mW) LED DRIVER EN/SS1 V 20mA, UP TO 6 LEDS 65 300 OUT3 EFFICIENCY (%) LED V POWER DISSIPATION FB3 EN/SS3 60 ALL CHANNELS 200 1M FLT ENABLED SW2 FB2 55 100 6.8pF 2.2μF 50 0 V 15μH 15μH VIN 0 0.5 1 1.5 2.5V TO 6V CCD NEGATIVE NORMALIZED CURRENT 3587 TA01b 22μF –8V, 100mA 3587 TA01a 3587fc 1
FEATURES DESCRIPTION
n
Ideal for CCD, LCD, LED Backlight and OLED
The LT®3587 provides a one chip solution for applications
Applications
requiring two positive and one negative high voltage sup- n
Easy Generation of 15V (50mA), –8V (100mA) and
plies. The LT3587 input voltage range of 2.5V to 6V makes
20V (20mA) from a Li-Ion Cell
it ideal for various battery-powered systems. n
VVIN Range: 2.5V to 6V
A single resistor programs each of the three output voltage n
Wide Output Ranges: Up to 32V for the Boosts and
levels and the output current of Boost3. The intelligent soft-
Up to –32V for the Inverter
start allows for sequential soft-start of the Boost1 output n Output Disconnect for the Boost Channels followed by the negative output with a single capacitor. n Boost3 Allows Voltage Programming and/or Current Internal sequencing circuitry also disables the inverter until Programming for a ‘One Wire Current Source’ the Boost1 output has reached 87% of its fi nal value. n Overload Fault Protection with Fault I/O Pin Indicator n Combined Soft-Start and Enable Pins The LT3587 integrates all the power switches, soft-start, n Small 20-Pin 3mm × 3mm QFN Package and output-disconnect circuits into a small 3mm × 3mm QFN package. This high level of integration combined
APPLICATIONS
with small external components makes the LT3587 ideal for space constrained applications. n Digital Still and Video Cameras L, LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. n Scanner and Display Systems n PDA, Cellular Phones and Handheld Computers n LED Backlight and OLED Display Drivers n CCD Imager Bias n General High Voltage Supply Bias
TYPICAL APPLICATION Li-Ion Powered Supply for CCD Imager and Six White Backlight LEDs
VVIN 2.5V TO 6V 10μH 15μH
Effi ciency Curve
1μF 90 800 2.2μF CDD+ = 50mA 10μF CDD+ SW3 V SW1 IN 85 CDD– = 100mA 700 CAP3 CAP1 CCD POSITIVE LED = 20mA POWER DISSIP 15V, 50mA I 80 600 FB3 VOUT1 8.06k 1M ALL CHANNELS GND FB1 75 500 ENABLED LT3587 2.7pF 70 400 A CDD– TION (mW) LED DRIVER EN/SS1 V 20mA, UP TO 6 LEDS 65 300 OUT3 EFFICIENCY (%) LED V POWER DISSIPATION FB3 EN/SS3 60 ALL CHANNELS 200 1M FLT ENABLED SW2 FB2 55 100 6.8pF 2.2μF 50 0 V 15μH 15μH VIN 0 0.5 1 1.5 2.5V TO 6V CCD NEGATIVE NORMALIZED CURRENT 3587 TA01b 22μF –8V, 100mA 3587 TA01a 3587fc 1