Datasheet Texas Instruments TLC2652CP — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TLC2652 |
| Artikelnummer | TLC2652CP |
Präzisions-Chopper-stabilisierter Operationsverstärker 8-PDIP
Datenblätter
TLC2652, TLC2652A, TLC2652Y Advanced LinCMOS Precision Chopper-Stabilized Op Amp datasheet
PDF, 1.1 Mb, Revision: E, Datei veröffentlicht: Feb 9, 2005
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 8 |
| Package Type | P |
| Industry STD Term | PDIP |
| JEDEC Code | R-PDIP-T |
| Package QTY | 50 |
| Carrier | TUBE |
| Device Marking | TLC2652CP |
| Width (mm) | 6.35 |
| Length (mm) | 9.81 |
| Thickness (mm) | 3.9 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 5.08 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | Zero Drift |
| Architecture | CMOS |
| CMRR(Min) | 120 dB |
| CMRR(Typ) | 140 dB |
| GBW(Typ) | 1.9 MHz |
| Input Bias Current(Max) | 60 pA |
| Iq per channel(Max) | 2.4 mA |
| Iq per channel(Typ) | 1.5 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 0.01 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 3 mA |
| Package Group | PDIP |
| Package Size: mm2:W x L | See datasheet (PDIP) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 2.8 V/us |
| Total Supply Voltage(Max) | 16 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 3.8 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 23 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.003 mV |
Öko-Plan
| RoHS | Compliant |
| Pb Free | Yes |
Anwendungshinweise
- Choosing an ADC and Op Amp for Minimum OffsetPDF, 72 Kb, Datei veröffentlicht: Oct 28, 1999
Designing a mixed-signal circuit containing analog and digital components can be a challenge to the development engineer. Requirements such as a low single-polarity supply voltage and a high degree of precision may conflict, and make the choice of components and the best circuit design difficult. This report discusses problems that arise in using operational amplifiers (op amps) for signal conditi - AB-174: Getting the Full Potential from your ADC (Rev. A)PDF, 72 Kb, Revision: A, Datei veröffentlicht: Jun 28, 2002
Many of today?s high-resolution ADCs (Analog-to-Digital Converters) are operating from a single supply and use fully differential inputs. This can be a problem for single-ended signals that are bipolar relative to common. This article illustrates circuit configurations that preserve the full-scale input range by using modern features, such as Programmable Gain Amplifiers (PGAs) and internal voltag
Modellreihe
Serie: TLC2652 (13)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps