Datasheet Texas Instruments OPA355NA/250G4 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | OPA355 |
| Artikelnummer | OPA355NA/250G4 |
2,5 V, 200 MHz GBW, CMOS-Einzel-Operationsverstärker mit Abschaltung 6-SOT-23 -40 bis 125
Datenblätter
OPA355, 2355, 3355: 200MHz, CMOS Operational Amplifier with Shutdown datasheet
PDF, 1.3 Mb, Revision: D, Datei veröffentlicht: Nov 6, 2003
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 6 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | C55 |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Herunterladen |
Parameter
| 2nd Harmonic | 81 dBc |
| 3rd Harmonic | 93 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | CMOS,Voltage FB |
| BW @ Acl | 450 MHz |
| CMRR(Min) | 66 dB |
| CMRR(Typ) | 80 dB |
| GBW(Typ) | 450 MHz |
| Input Bias Current(Max) | 50 pA |
| Iq per channel(Max) | 11 mA |
| Iq per channel(Typ) | 8.3 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 7 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 100 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 6SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 300 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 5.8 nV/rtHz |
| Vn at Flatband(Typ) | 5.8 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 9 mV |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Tuning in AmplifiersPDF, 44 Kb, Datei veröffentlicht: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Wideband Complementary Current Output DAC Single-Ended InterfacePDF, 597 Kb, Datei veröffentlicht: Jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, Datei veröffentlicht: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, Datei veröffentlicht: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Modellreihe
Serie: OPA355 (8)
- OPA355NA/250 OPA355NA/250G4 OPA355NA/3K OPA355NA/3KG4 OPA355UA OPA355UA/2K5 OPA355UA/2K5G4 OPA355UAG4
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)