Datasheet Texas Instruments OPA335AIDBVTG4 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | OPA335 |
| Artikelnummer | OPA335AIDBVTG4 |
Maximal 0,05 uV / C, Einzelversorgungs-CMOS-Operationsverstärker 5-SOT-23 -40 bis 125
Datenblätter
0.05uV/C max, Single-Supply CMOS Op Amps Zero-Drift datasheet
PDF, 1.3 Mb, Revision: D, Datei veröffentlicht: Jun 12, 2003
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | OAPI |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | EMI Hardened,Zero Drift |
| Architecture | CMOS |
| CMRR(Min) | 110 dB |
| CMRR(Typ) | 130 dB |
| GBW(Typ) | 2 MHz |
| Input Bias Current(Max) | 200 pA |
| Iq per channel(Max) | 0.35 mA |
| Iq per channel(Typ) | 0.285 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 0.02 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 50 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 1.6 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 60 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.005 mV |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- OPA334, OPA2334, OPA335, OPA2335 EMI Immunity Performance (Rev. A)PDF, 90 Kb, Revision: A, Datei veröffentlicht: Oct 31, 2012
- Zero-drift Amplifiers: Features and Benefits (Rev. A)PDF, 131 Kb, Revision: A, Datei veröffentlicht: Feb 9, 2017
- High-Voltage Signal Conditioning for Low Voltage ADCsPDF, 135 Kb, Datei veröffentlicht: Jun 15, 2004
Analog designers are frequently required to develop circuits that convert high-voltage signals to levels acceptable for low-voltage data converters. This paper describes several solutions for this common task using modern amplifiers and typical power supplies. Five examples of conditioning ±10V bipolar signals for low-voltage single-rail analog-to-digital converters(ADCs) are presented: - Getting the most out of your instrumentation amplifier designPDF, 177 Kb, Datei veröffentlicht: Oct 10, 2005
- High-Voltage Signal Conditioning for Differential ADCsPDF, 125 Kb, Datei veröffentlicht: Jun 14, 2004
Analog designers are frequently required to convert high-voltage signals to levels acceptable to low-voltage data converters with differential inputs. This paper describes solutions for this common task using modern amplifiers and typical power supplies. Three examples of conditioning В±10V bipolar signals for low-voltage analog-to-digital converters (ADCs) are shown: a single-supply design, - Offset Correction Methods: Laser Trim, e-Trim, and Chopper (Rev. A)PDF, 795 Kb, Revision: A, Datei veröffentlicht: Jul 20, 2017
- Tuning in AmplifiersPDF, 44 Kb, Datei veröffentlicht: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, Datei veröffentlicht: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, Datei veröffentlicht: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Modellreihe
Serie: OPA335 (8)
- OPA335AID OPA335AIDBVR OPA335AIDBVRG4 OPA335AIDBVT OPA335AIDBVTG4 OPA335AIDG4 OPA335AIDR OPA335AIDRG4
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps