Datasheet Texas Instruments LM339N — Datenblatt
Hersteller | Texas Instruments |
Serie | LM339 |
Artikelnummer | LM339N |
Quad Differentialkomparator 14-PDIP 0 bis 70
Datenblätter
LMx39x, LM2901xx Quad Differential Comparators datasheet
PDF, 1.4 Mb, Revision: T, Datei veröffentlicht: Jun 30, 2015
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Verpackung
Pin | 14 |
Package Type | N |
Industry STD Term | PDIP |
JEDEC Code | R-PDIP-T |
Package QTY | 25 |
Carrier | TUBE |
Device Marking | LM339N |
Width (mm) | 6.35 |
Length (mm) | 19.3 |
Thickness (mm) | 3.9 |
Pitch (mm) | 2.54 |
Max Height (mm) | 5.08 |
Mechanical Data | Herunterladen |
Parameter
Input Bias Current (+/-)(Max) | 50 nA |
Iq per channel(Max) | 0.5 mA |
Number of Channels | 4 |
Operating Temperature Range | 0 to 70 C |
Output Type | Open Collector |
Package Group | PDIP |
Package Size: mm2:W x L | See datasheet (PDIP) PKG |
Propagation Delay Time | 0.3 uS |
Rail-to-Rail | Out |
Rating | Catalog |
Special Features | N/A |
VICR(Max) | 28.5 V |
Vos (Offset Voltage @ 25C)(Max) | 5 mV |
Vs(Max) | 30 V |
Vs(Min) | 2 V |
Öko-Plan
RoHS | Compliant |
Pb Free | Yes |
Anwendungshinweise
- A Quad of Independently Func Comparators (Rev. A)PDF, 1.6 Mb, Revision: A, Datei veröffentlicht: Apr 23, 2013
This application note discusses the features, design, and uses of the LM139/LM239/LM339 family ofdevices. - AN-286 Applications of the LM392 Comparator Op Amp IC (Rev. B)PDF, 462 Kb, Revision: B, Datei veröffentlicht: Apr 26, 2013
This application note discusses the uses of the LM339 quad comparator and the LM324 op amp areamong the most widely used linear ICs today. The combination of low cost, single or dual supply operationand ease of use has contributed to the wide range of applications for these devices. - AN-288 System-Oriented DC-DC Conversion Techniques (Rev. B)PDF, 833 Kb, Revision: B, Datei veröffentlicht: May 6, 2013
This application note discusses the operation of system-oriented DC-DC conversion techniques. - Designing Overcurrent protection for TPL7407L Peripheral DriverPDF, 177 Kb, Datei veröffentlicht: Nov 5, 2014
Microcontroller units (MCUs) are generally limited with lower drive on the I/Os. Most of the applicationsrequiring MCU boards to drive high-current loads need discrete implementation and additional components which use a lot of board space. This board space is called a peripheral driver section. The TPL7407L device is an integrated peripheral driver with seven channel drivers inside. The TPL740
Modellreihe
Serie: LM339 (24)
Herstellerklassifikation
- Semiconductors > Amplifiers > Comparators