Datasheet Renesas IXP3114-Y1B000NCG8 — Datenblatt

Short-Form Datasheet
IXP3114/IXP3104
I3C Basic 1:4 GPIO Expander Description Features The IXP3114/3104 is an I3C Basic 1:4 General I/O
Expander with integrated Temperature Sensor used
for various motherboard applications. The
IXP3114/3104 has four configurable I/O pins that
can be configured as either input only, output only
or input/output on a local interface. The GPIO pin is
a CMOS push-pull buffer or open-drain with a
configurable pull-up resistor. The voltage levels for
either open drain or push pull are independently
configurable. • 1:4 General Purpose Input/Output Expander
(GPIO) • Two-wire programmable I²C or I3C bus serial
interface • Single device load on the Host bus • Up to 12.5MHz transfer rate • Single 1.8V power supply input • 1.0V VLDO output at VIO pin • Supports 1.0V, 1.1V, and 1.2V push-pull IO levels • Supports 1.0V, 1.1V, 1.2V, 1.8V, 2.5V, and 3.3V
open-drain I/O levels • Integrated Temperature Sensor; 0.5°C accuracy
with 0.25°C resolution • Bus reset function • Packet Error Check (PEC) function • Parity Error Check function • Up to 8 unique addressing • Programmable I²C, I3C bus addressing scheme • In-Band Interrupt (IBI) • 9-pin thermally enhanced DFN package • Temperature: Industrial range of -40°C to 125°C The IXP family I/O expander is typically used when
there is a need for additional GPIO input and output
in an application. Applications
• Mobile devices • Embedded computing • PCs/notebooks • Servers Figure 1. Block Diagram Mar.3.20 Page 1 IXP3114/IXP3104 Ordering Information
Orderable Part Number Internal Thermal Sensor GPIO Pins IXP3114 Yes 4 IXP3104 No 4 Mar.3.20 Page 2 IMPORTANT NOTICE AND DISCLAIMER
RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL
SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING
REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND …