Datasheet Texas Instruments MSP430FR2153TPT — Datenblatt
| Hersteller | Texas Instruments |
| Serie | MSP430FR2153 |
| Artikelnummer | MSP430FR2153TPT |
24-MHz-105C-ULP-Mikrocontroller mit 16-KB-FRAM, 2-KB-SRAM, 44 E / A, 12-Bit-ADC 48-LQFP -40 bis 105
Datenblätter
MSP430FR235x, MSP430FR215x Mixed-Signal Microcontrollers datasheet
PDF, 1.6 Mb, Datei veröffentlicht: May 10, 2018
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Preview (Device has been announced but is not in production. Samples may or may not be available) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 48 |
| Package Type | PT |
| Industry STD Term | LQFP |
| JEDEC Code | S-PQFP-G |
| Package QTY | 250 |
| Carrier | JEDEC TRAY (10+1) |
| Device Marking | 430FR2153 |
| Width (mm) | 7 |
| Length (mm) | 7 |
| Thickness (mm) | 1.4 |
| Pitch (mm) | 0.5 |
| Max Height (mm) | 1.6 |
| Mechanical Data | Herunterladen |
Parameter
| ADC | 12-bit SAR |
| ADC: Channels | 12 |
| Bootloader | UART BSL |
| Comparator Channels | 2 |
| Featured | FR2 |
| Features | Real-Time Clock |
| GPIO Pins | 44 |
| I2C | 2 |
| Non-volatile Memory | 16 KB |
| Operating Temperature Range | -40 to 105 C |
| Package Group | LQFP |
| Package Size: mm2:W x L | 48LQFP: 81 mm2: 9 x 9(LQFP) PKG |
| RAM | 2 KB |
| SPI | 4 |
| Special I/O | N/A |
| Timers - 16-bit | 4 |
| UART | 2 |
| USB | No |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: MSP-TS430PT48
Target Development Board for MSP430FR2355 MCU - 48-pin (microcontroller not included)
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: MSP-EXP430FR2355
MSP430FR2355 LaunchPad Development Kit
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Migration From MSP430 FR58xx FR59xx and FR6xx to FR4xx and FR2xxPDF, 214 Kb, Datei veröffentlicht: May 4, 2018
This application report enables easy migration from the MSP430FR58xx MSP430FR59xx and MSP430FR6xx family to the MSP430FR4xx and MSP430FR2xx family. This report describes programming system and peripheral considerations when migrating firmware. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the - Migrating From MSP430 F2xx and G2xx Families to MSP430 FR4xx and FR2xx Family (Rev. E)PDF, 237 Kb, Revision: E, Datei veröffentlicht: May 4, 2018
This application report helps to ease the migration from MSP430F2xx flash-based MCUs to the MSP430FR4xx and MSP430FR2xx family of FRAM-based MCUs. It discusses programming system hardware core architecture and peripheral considerations. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the MSP430
Modellreihe
Serie: MSP430FR2153 (6)
Herstellerklassifikation
- Semiconductors > Microcontrollers (MCU) > MSP430 Ultra-Low-Power MCUs > Value Line MCUs