Datasheet Texas Instruments BQ2004SN — Datenblatt
| Hersteller | Texas Instruments |
| Serie | BQ2004 |
| Artikelnummer | BQ2004SN |
NiCd / NiMH-Batterieladegerät im Schaltmodus mit negativem dV, Spitzenspannungserkennung, dT / dt-Abschluss 16-SOIC -20 bis 70
Datenblätter
Fast-Charge IC datasheet
PDF, 612 Kb, Revision: B, Datei veröffentlicht: Apr 19, 2005
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 16 | 16 | 16 |
| Package Type | D | D | D |
| Industry STD Term | SOIC | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 40 | 40 | 40 |
| Carrier | TUBE | TUBE | TUBE |
| Device Marking | 2004 | A4 | -A4 |
| Width (mm) | 3.91 | 3.91 | 3.91 |
| Length (mm) | 9.9 | 9.9 | 9.9 |
| Thickness (mm) | 1.58 | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 | 1.75 |
| Mechanical Data | Herunterladen | Herunterladen | Herunterladen |
Parameter
| Absolute Vin (safety rating)(Max)( | 7 V |
| Battery Charge Voltage(Max) | 20 V |
| Cell Chemistry | NiCd,NiMH |
| Charge Current(Max) | 2 A |
| Control Interface | Standalone (RC-Settable) |
| Control Topology | Switch-Mode Buck |
| Number of Series Cells | 1,2,3,4 |
| Operating Vin(Max) | 5.5 V |
| Operating Vin(Min) | 4.5 V |
| Package Group | SOIC |
| Package Size: mm2:W x L | 16SOIC: 59 mm2: 6 x 9.9(SOIC) PKG |
| Special Features | Temp Monitoring (Thermistor Pin) |
| USB Feature | N/A |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: DV2004S1
BQ2004 Evaluation Module for NiCd/NiMH, switchmode, up to 3A
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: DV2004L1
BQ2004 Evaluation Module for NiCd/NiMH, linear
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- High-Side Current Sensing with Benchmarq's Fast-Charge Control ICsPDF, 31 Kb, Datei veröffentlicht: Sep 5, 1999
A low-side, current-sensing resistor in a fast-charge control circuit generates a small voltage drop between the low side of the battery pack and ground. This drop is not a problem in most cases; however, some applications, particularly mobile communications circuits, are intolerant of any potential difference between the low side of the battery pack and ground. Using a few additional components i - Using NiMH and Li-Ion Batteries in Portable ApplicationsPDF, 177 Kb, Datei veröffentlicht: Sep 5, 1999
- Battery Charger Termination Issues With System Load Applied Across Battery (Rev. A)PDF, 151 Kb, Revision: A, Datei veröffentlicht: Oct 2, 2006
Battery Charger Termination Issues With System Load Applied Across Battery While Charging
Modellreihe
Serie: BQ2004 (6)
- BQ2004PN BQ2004PNG4 BQ2004SN BQ2004SNG4 BQ2004SNTR BQ2004SNTRG4
Herstellerklassifikation
- Semiconductors > Power Management > Battery Management Products > Battery Charger IC