Datasheet Texas Instruments OPA603AP — Datenblatt

HerstellerTexas Instruments
SerieOPA603
ArtikelnummerOPA603AP
Datasheet Texas Instruments OPA603AP

Hochgeschwindigkeits-Operationsverstärker mit Stromrückkopplung 8-PDIP

Datenblätter

Datasheet
TSP

Preise

Status

Lifecycle StatusObsolete (Manufacturer has discontinued the production of the device)
Manufacture's Sample AvailabilityNo

Verpackung

Pin8
Package TypeP
Industry STD TermPDIP
JEDEC CodeR-PDIP-T
Width (mm)6.35
Length (mm)9.81
Thickness (mm)3.9
Pitch (mm)2.54
Max Height (mm)5.08
Mechanical DataHerunterladen

Öko-Plan

RoHSNot Compliant
Pb FreeNo

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: DEM-OPA68XP
    DEM-OPA68xP: Demonstration Fixture
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Voltage-Feedback Amps vs Current-Feedback Amps: Bandwidth and Distortion
    PDF, 33 Kb, Datei veröffentlicht: Sep 27, 2000
    Current-feedback amplifiers have nearly constant bandwidth for varying closed-loop gains. The reason is that the user can adjust the open-loop gain of the current-feedback amplifier by changing the feedback network without affecting the open-loop pole.
  • Composite Op Amp Gives You The Best of Both Worlds
    PDF, 32 Kb, Datei veröffentlicht: Sep 27, 2000
    Classical op amps such as the OPA627 have excellent performance in applications where the required gain bandwidth is low compared to the gain-bandwidth product of the op amp. However, increasing closed-loop gain decreases the error-reducing loop gain. Furthermore, starting at relatively low frequencies, the loop gain rolls-off at 20dB/decade of signal frequency increase. In combination these effec
  • The Current-Feedback Op Amp: A High-Speed Building Block
    PDF, 117 Kb, Datei veröffentlicht: Oct 2, 2000
    Although current-feedback amplifiers (CFAs) have been in use for quite some time, there is a reluctance to view them in the same light as voltage-feedback amplifiers (VFAs). For instance, the gain-bandwidth curve of VFAs has a parallel in a transimpedance-bandwidth curve for CFAs. This parameter can be used to determine the closed-loop behavior of the CFA in same way that GBW can for the VFA. Not
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Modellreihe

Serie: OPA603 (3)

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps