Datasheet Texas Instruments OPA445AP — Datenblatt
Hersteller | Texas Instruments |
Serie | OPA445 |
Artikelnummer | OPA445AP |
Hochspannungs-FET-Eingangs-Operationsverstärker 8-PDIP -55 bis 125
Datenblätter
High Voltage FET-Input Operational Amplifier datasheet
PDF, 899 Kb, Revision: B, Datei veröffentlicht: Apr 10, 2008
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Verpackung
Pin | 8 |
Package Type | P |
Industry STD Term | PDIP |
JEDEC Code | R-PDIP-T |
Package QTY | 50 |
Carrier | TUBE |
Device Marking | OPA445AP |
Width (mm) | 6.35 |
Length (mm) | 9.81 |
Thickness (mm) | 3.9 |
Pitch (mm) | 2.54 |
Max Height (mm) | 5.08 |
Mechanical Data | Herunterladen |
Parameter
Additional Features | N/A |
Architecture | FET |
CMRR(Min) | 80 dB |
CMRR(Typ) | 95 dB |
GBW(Typ) | 2 MHz |
Input Bias Current(Max) | 50 pA |
Iq per channel(Max) | 4.7 mA |
Iq per channel(Typ) | 4.2 mA |
Number of Channels | 1 |
Offset Drift(Typ) | 10 uV/C |
Operating Temperature Range | -55 to 125 C |
Output Current(Typ) | 26 mA |
Package Group | PDIP |
Package Size: mm2:W x L | See datasheet (PDIP) PKG |
Rail-to-Rail | No |
Rating | Catalog |
Slew Rate(Typ) | 15 V/us |
Total Supply Voltage(Max) | 90 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 20 +5V=5, +/-5V=10 |
Vos (Offset Voltage @ 25C)(Max) | 3 mV |
Öko-Plan
RoHS | Compliant |
Anwendungshinweise
- Simple Circuit Delivers 38Vp-p at 5A from 28V Unipolar SupplyPDF, 26 Kb, Datei veröffentlicht: Sep 27, 2000
Since the first analog IC requiring bipolar supplies was developed, people have been trying to operate them from unipolar supplies. Not only do the headroom (VS - VOUTMAX) requirements come into play, but with a unipolar supply typically come unipolar outputs. To get bipolar output swings from a unipolar supply, drive the load differentially and create a reference signal wh - Boost Instrument Amp CMR With Common-Mode Driven SuppliesPDF, 175 Kb, Datei veröffentlicht: Sep 27, 2000
Ever-increasing demands are being placed on instrumentation amplifier (IA) performance. When standard IAs can not deliver the required performance, consider this enhanced version. Dramatic performance improvements can be achieved by operating the input amplifiers of a classical three-op-amp IA from common-mode driven sub-regulated power supplies. - Optoelectronics Circuit CollectionPDF, 261 Kb, Datei veröffentlicht: Jun 11, 2001
This application report presents a collection of analog circuits that may be useful in electro-optic applications such as optical networking. The circuits are Avalanche Photodiode Bias Supply 1; Linear TEC Driver-1, -2, and -3; Laser Diode Driver-1 and -2; and Temperature Under- and Over-range Sensing with a Window Comparator.
Modellreihe
Serie: OPA445 (9)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Power Op Amps