Datasheet Texas Instruments TPS2024P — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TPS2024 |
| Artikelnummer | TPS2024P |
2,2A, 2,7-5,5 V IC-Hi-Side-MOSFET mit einem einzelnen Stromverteilungsschalter, Fehlerbericht, Act-Low 8-PDIP -40 bis 85 aktivieren
Datenblätter
TPS2020/21/22/23/24 - Power-Distribution Switches datasheet
PDF, 810 Kb, Revision: C, Datei veröffentlicht: Sep 24, 2007
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 8 |
| Package Type | P |
| Industry STD Term | PDIP |
| JEDEC Code | R-PDIP-T |
| Package QTY | 50 |
| Carrier | TUBE |
| Device Marking | TPS2024P |
| Width (mm) | 6.35 |
| Length (mm) | 9.81 |
| Thickness (mm) | 3.9 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 5.08 |
| Mechanical Data | Herunterladen |
Parameter
| Continuous Current(Max) | 2 A |
| Current Limit Topology | Constant-Current |
| Enable | Active Low |
| Number of Switches | 1 |
| Operating Temperature Range | -40 to 85 C |
| Package Group | PDIP |
| Package Size: mm2:W x L | See datasheet (PDIP) PKG |
| Rating | Catalog |
| USB Switch rDS(on) | 33 mOhms |
| Vin(Max) | 5.5 V |
| Vin(Min) | 2.7 V |
Öko-Plan
| RoHS | Compliant |
| Pb Free | Yes |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: TPS2024EVM-290
TPS2024 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Protecting Industrial Digital Control Outputs Using Intelligent MOSFETSPDF, 55 Kb, Datei veröffentlicht: Oct 26, 2000
Digital outputs in industrial applications often must implement some type of protection measure. The integrity of the signal, transmitted over a distance of several meters, can suffer due to fault conditions like a short circuit or an overcurrent, either of which can damage the device driving the signal. To prevent electromagnetic compatibility problems, it may also be necessary to slow down the s - TPS202x/3x And TPS204x/5x USB Power DistributionPDF, 116 Kb, Datei veröffentlicht: Oct 16, 1998
The USB specification, revision 1.1, defines the power distribution requirements for the self-powered hubs (including hosts), bus-powered hubs, and functions. This application report demonstrates how Texas Instruments power management products meet or exceed voltage regulation, voltage droop, and EMI requirements in the USB power distribution system. - Power Management Solutions for Infiniband (SM) I/O ModulesPDF, 75 Kb, Datei veröffentlicht: Oct 20, 2000
InfiniBand, a scalable, modular, channel-based, switched-fabric architecture, is defined for the connection of servers with servers and with storage and networking devices. Because appropriate power management is essential for quality implementations, this report presents straightforward solutions for both high-power and low-power applications as required by the InfiniBand specification. - Power Supply Sequencing Solutions for Dual Supply Voltage DSPs (Rev. A)PDF, 104 Kb, Revision: A, Datei veröffentlicht: Jul 5, 2000
This application report describes power-supply sequencing recommendations and techniques applicable to dual supply voltage DSPs in TI's TMS320C2000 TMS320C5000 and TMS320C6000 families. These techniques take advantage of the reset power good enable and soft-start features available on TI Power Management Products including low drop out regulators switching power supply controllers supply vol - A Power-Distribution Switch With Latched Over-Current Protection (Rev. A)PDF, 99 Kb, Revision: A, Datei veröffentlicht: Jul 3, 2007
Power-distribution switches, like the TPS203x, operate in retry mode in an overload, but some applications require the switch to latch off. The latch-off function can be implemented using the simple circuit described in this application report.
Modellreihe
Serie: TPS2024 (5)
- TPS2024D TPS2024DG4 TPS2024DR TPS2024DRG4 TPS2024P
Herstellerklassifikation
- Semiconductors > Power Management > USB Power and Charging Port Controllers > Fixed Current Limited Switch