Datasheet Texas Instruments HPA01142PWR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TPS61085 |
| Artikelnummer | HPA01142PWR |
18,5 V, 2 A, 650 kHz / 1,2 MHz DC-DC-Aufwärtswandler mit erzwungenem PWM-Modus 8-TSSOP -40 bis 85
Datenblätter
TPS61085 650-kHz,1.2-MHz, 18.5-V Step-Up DC-DC Converter datasheet
PDF, 1.4 Mb, Revision: B, Datei veröffentlicht: Dec 15, 2014
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 8 |
| Package Type | PW |
| Industry STD Term | TSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | 61085 |
| Width (mm) | 4.4 |
| Length (mm) | 3 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Herunterladen |
Parameter
| Duty Cycle(Max) | 90 % |
| Iq(Typ) | 0.07 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | TSSOP |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Frequency Synchronization |
| Switch Current Limit(Min) | 2 A |
| Switch Current Limit(Typ) | 2.6 A |
| Switching Frequency(Max) | 1500 kHz |
| Switching Frequency(Min) | 480 kHz |
| Type | Converter |
| Vin(Max) | 6 V |
| Vin(Min) | 2.3 V |
| Vout(Max) | 18.5 V |
| Vout(Min) | 2.8 V |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: TPS61085EVM-355
TPS61085 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Low Cost 1W Isolated Power Supply Solution with TPS61085PDF, 175 Kb, Datei veröffentlicht: Jun 26, 2012
- AN-2020 Thermal Design By Insight, Not Hindsight (Rev. C)PDF, 568 Kb, Revision: C, Datei veröffentlicht: Apr 23, 2013
This application report provides an in-depth discussion of thermal design. - Minimizing Ringing at the Switch Node of a Boost ConverterPDF, 201 Kb, Datei veröffentlicht: Sep 15, 2006
The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter. - Design considerations for a resistive feedback divider in a DC/DC converterPDF, 393 Kb, Datei veröffentlicht: Apr 26, 2012
- Basic Calculation of a Boost Converter's Power Stage (Rev. C)PDF, 186 Kb, Revision: C, Datei veröffentlicht: Jan 8, 2014
This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed. - PowerPAD Thermally Enhanced Package (Rev. H)PDF, 983 Kb, Revision: H, Datei veröffentlicht: Jul 6, 2018
- Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)PDF, 755 Kb, Revision: A, Datei veröffentlicht: Jan 13, 2012
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, Revision: B, Datei veröffentlicht: Jun 15, 2017
- IQ: What it is what it isn’t and how to use itPDF, 198 Kb, Datei veröffentlicht: Jun 17, 2011
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revision: A, Datei veröffentlicht: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
Modellreihe
Serie: TPS61085 (9)
Herstellerklassifikation
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)