Datasheet Microchip MCP2003B-E/SNVAO — Datenblatt

MCP2003B
LIN Transceiver
Features Description The MCP2003B is Compliant with Local
Interconnect Network (LIN) Bus Specifications
1.3, 2.0, 2.1, 2.2, SAE J2602, and ISO17987 Supports Baud Rates up to 20 KbaudпЂ with
LIN-Compatible Output Driver 60V Load Dump Protected Very High Electromagnetic Immunity (EMI) Meets
Stringent Original Equipment Manufacturers
(OEM) Requirements Direct Capacitor Coupling Robustness without
Transient Voltage Suppressor (TVS):
-В±35V on LBUS (SAE J2962-1)
-В±85V on LBUS (SAE J2962-1) High Electrostatic Discharge (ESD)
Immunity without TVS:
->25 kV on LBUS (SAE J2962-1)
->15 kV on VBB (IEC 61000-4-2)
->6 kV on LBUS (IEC 61000-4-2) Very High Immunity to RF Disturbances Meets
Stringent OEM Requirements Wide Supply Voltage: 5.5V – 30.0V Continuous Extended (E) Temperature Range: -40°C to +125°C High (H) Temperature Range: -40°C to +150°C Interfaces to PIC® MCU EUSART and Standard
USARTs LIN Bus Pin:
-Internal pull-up resistor and diode
-Protected against battery shorts
-Protected against loss of ground
-High current drive: >40 mA Automatic Thermal Shutdown Low-Power Mode:
-Receiver monitoring bus and transmitter off:
(пЃЂ 5 ВµA) This device provides a bidirectional, half-duplex …