Datasheet Microchip PL133-47SI — Datenblatt

PL133-47
Low-Power 2.25V to 3.63V DC to 150MHz 1:4 Fanout Buffer IC FEATURES DESCRIPTION п‚ п‚ п‚ п‚ п‚ п‚ п‚ п‚ п‚ The PL133-47 is an advanced fanout buffer design for
high performance, low-power, small form factor applications. The PL133-47 accepts a reference clock input from
DC to 150MHz and provides 4 outputs of the same frequency. 1:4 LVCMOS output fanout buffer for DC to150MHz
Low Additive Phase Jitter of 60fs RMS
8mA Output Drive Strength
Low power consumption for portable applications
Low input-output delay
Output-Output skew less than 250ps
2.5V to 3.3V, В±10% operation
Operating temperature range from -40В°C to 85В°C
Available in 8-Pin SOP GREEN/RoHS package The PL133-47 is offered in a SOP-8L package and it offers
the best phase noise, additive jitter performance, and lowest power consumption of any comparable IC. BLOCK DIAGRAM AND PACKAGE PINOUT CLK0
CLK1
REF
CLK2 VDD 1 8 CLK3 VDD 2 7 CLK2 REF 3 6 CLK1 GND 4 5 CLK0 CLK3 SOP-8L Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1(408) 944 -0800 fax +1(408) 474-1000 www.micrel.com Rev 02/14/1 Page 1 PL133-47
Low-Power 2.25V to 3.63V DC to 150MHz 1:4 Fanout Buffer IC
PIN DESCRIPTIONS
Name SOP-8L Type Description REF 3 I Input reference frequency. CLK0 5 O Buffered clock output CLK1 6 O Buffered clock output CLK2 7 O Buffered clock output CLK3 8 O Buffered clock output VDD 1, 2 P VDD connection GND 4 P GND connection LAYOUT RECOMMENDATIONS
The following guidelines are to assist you with a performance optimized PCB d esign: Signal Integrity and Termination
Considerations Decoupling and Power Supply
Considerations -Keep traces short!
-Trace = Inductor. With a capacitive load this equals …