Datasheet Intersil HS-26CT32EH — Datenblatt

DATASHEET
HS-26CT32RH-T FN4593
Rev 1.00
July 1999 Radiation HardenedQuad Differential Line Receiver
Intersil’s Satellite Applications FlowTM (SAF) devices are
fully tested and guaranteed to 100kRAD total dose. These
QML Class T devices are processed to a standard flow
intended to meet the cost and shorter lead-time needs of
large volume satellite manufacturers, while maintaining a
high level of reliability. HS1-26CT32RH-T (SBDIP) CDIP2-T16
TOP VIEW The Intersil HS-26CT32RH-T is a Quad Differential Line
Receiver designed for digital data transmission over
balanced lines and meets the requirements of EIA Standard
RS-422. Radiation Hardened CMOS processing assures low
power consumption, high speed, and reliable operation in
the most severe radiation environments. ENABLE 4 The HS-26CT32RH-T has an input sensitivity of 200mV (typ.)
over the common mode input voltage range of п‚±7V. The
receivers are also equipped with input fail safe circuitry, which
causes the outputs to go to a logic “1” when the inputs are
open. TTL compatible Enable and Disable functions are
common to all four receivers. Specifications
Specifications for Rad Hard QML devices are controlled by
the Defense Supply Center in Columbus (DSCC). The SMD …

DATASHEET
HS-26CT32RH, HS-26CT32EH FN2930
Rev 6.00
May 23, 2013 Radiation Hardened Quad Differential Line Receivers
The Intersil HS-26CT32RH, HS-26CT32EH are differential line
receivers designed for digital data transmission over balanced
lines and meets the requirements of EIA standard RS-422.
Radiation hardened CMOS processing assures low power
consumption, high speed, and reliable operation in the most
severe radiation environments.
The HS-26CT32RH, HS-26CT32EH have an input sensitivity
typically of 200mV over the common mode input voltage
range of п‚±7V. The receivers are also equipped with input fail
safe circuitry, which causes the outputs to go to a logic “1”
when the inputs are open. Enable and Disable functions are
common to all four receivers. Features Electrically screened to SMD # 5962-95631 QML qualified per MIL-PRF-38535 requirements 1.2 Micron radiation hardened CMOS
-Total dose Up to 300kRAD(Si) Latch-up free EIA RS-422 compatible outputs Operation with TTL based on VIH = VDD/2 Input fail safe circuitry Specifications for Rad Hard QML devices are controlled by the
Defense Logistics Agency Land and Maritime (DLA). The SMD
numbers listed in the “Ordering Information” must be used
when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-95631. A “hot-link” is also provided on
our homepage for downloading. High impedance inputs when disabled or powered down Low power dissipation standby (Max) .138mW Single 5V supply Full Military temperature range . -55В°C to +125В°C Applications Line receiver for MIL-STD-1553 serial data bus Line receiver for RS422 Logic Diagram …