Datasheet Intersil HI-507 — Datenblatt

Hersteller	Intersil
Serie	HI-507

Einzelne 16- und 8 / Differential-8-Kanal- und 4-Kanal-CMOS-Analogmultiplexer

Datenblätter

Herunterladen

PDF, 887 Kb, Revision: 2017-12-14

Auszug aus dem Dokument

HI-506, HI-507, HI-508, HI-509
Data Sheet Single 16 and 8/Differential 8-Channel and
4-Channel CMOS Analog Multiplexers
The HI-506/HI-507 and HI-508/HI-509 monolithic CMOS
multiplexers each include an array of sixteen and eight
analog switches respectively, a digital decoder circuit for
channel selection, voltage reference for logic thresholds, and
an enable input for device selection when several
multiplexers are present. The Dielectric Isolation (DI)
process used in fabrication of these devices eliminates the
problem of latchup. DI also offers much lower substrate
leakage and parasitic capacitance than conventional junction
isolated CMOS (see Application Note AN520). June 14, 2016 FN3142.10 Features Pb-Free Available (RoHS Compliant) (See Ordering Info) Low ON Resistance 180пЃ— Wide Analog Signal RangeпЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ®пЂ пЂ В±15V TTL/CMOS Compatible Access Time . 250ns Maximum Power Supply 44V Break-Before-Make Switching No Latch-Up The switching threshold for each digital input is established by
an internal +5V reference, providing a guaranteed minimum
2.4V for logic вЂњ1вЂќ and maximum 0.8V for logic вЂњ0вЂќ. This allows
direct interface without pullup resistors to signals from most
logic families: CMOS, TTL, DTL and some PMOS. For
protection against transient overvoltage, the digital inputs
include a series 200пЃ— resistor and diode clamp to each
supply. Replaces DG506A/DG506AA and DG507A/DG507AA The HI-506 is a single 16-channel, the HI-507 is an
8-channel differential, the HI-508 is a single 8-channel and
the HI-509 is a 4-channel differential multiplexer. Selector Switch Replaces DG508A/DG508AA and DG509A/DG509AA Applications Data Acquisition Systems Precision Instrumentation Demultiplexing If input overvoltages are present, the HI-546/HI-547/HI-548/
HI-549 multiplexers are recommended. 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. …

Preise

Verpackung

	HI1-0507-2	HI3-0507-5	HI3-0507-5Z	HI4P0507-5
N	1	2	3	4

Package	28 Ld CERDIP Paketumrisszeichnung	28 Ld PDIP Paketumrisszeichnung	28 Ld PDIP Paketumrisszeichnung	28 Ld PLCC Paketumrisszeichnung
Package Index	F28.6	E28.6	E28.6	N28.45
Peak Temperature				225°C
Pin Count	28	28	28	28
Family	CERDIP	PDIP	PDIP	PLCC

Parameter

Parameters / Models	HI1-0507-2	HI3-0507-5	HI3-0507-5Z	HI4P0507-5
Number of Channels	16	16	16	16
Chg Inj	15 pC	15 pC	15 pC	15 pC
Configuration	2 x 8:1	2 x 8:1	2 x 8:1	2 x 8:1
Description	Single 16 and 8/Differential 8-Channel and 4-Channel CMOS Analog Multiplexers	Single 16 and 8/Differential 8-Channel and 4-Channel CMOS Analog Multiplexers	Single 16 and 8/Differential 8-Channel and 4-Channel CMOS Analog Multiplexers	Single 16 and 8/Differential 8-Channel and 4-Channel CMOS Analog Multiplexers
Drain Cap	30 pF	30 pF	30 pF	30 pF
IS	1.5 mA	1.5 mA	1.5 mA	1.5 mA
Leakage	0.3 nA	0.3 nA	0.3 nA	0.3 nA
Number of Channels	16	16	16	16
Operating Temperature Range	-55 to 125	-55 to 125	-55 to 125	-55 to 125
Qualification Level	Standard	Standard	Standard	Standard
Source Cap	10 pF	10 pF	10 pF	10 pF
Switch or MUX	MUX	MUX	MUX	MUX
TOFF	250 ns	250 ns	250 ns	250 ns
TON	250 ns	250 ns	250 ns	250 ns
Type of Switch	N/A	N/A	N/A	N/A
VCC (Dual) (max)	В±18 V	В±18 V	В±18 V	В±18 V
VCC (Dual) (min)	В±10 V	В±10 V	В±10 V	В±10 V
VCC (Single) (max)	20 V	20 V	20 V	20 V
VCC (Single) (min)	20 V	20 V	20 V	20 V
rDS(ON)	180 Ω	180 Ω	180 О©	180 Ω

Öko-Plan

	HI1-0507-2	HI3-0507-5	HI3-0507-5Z	HI4P0507-5
RoHS			Compliant

Andere Optionen

HI-506 HI-508 HI-509

Modellreihe

Serie: HI-507 (4)

HI1-0507-2 HI3-0507-5 HI3-0507-5Z HI4P0507-5

Herstellerklassifikation

Switches, MUX & Crosspoints > High Voltage > Switches/MUXs/Crosspoints