Datasheet Microchip PIC32MM0064GPM064-I/PT — Datenblatt

PIC32MM0256GPM064 FAMILY
32-Bit Flash Microcontroller with MIPS32В® microAptivв„ў UC Core,
Low Power and USB
Operating Conditions Peripheral Features USB 2.0 Compliant Full-Speed and Low-Speed Device,
Host and On-The-Go (OTG) Controller:
-Dedicated DMA
-Device mode operation from FRC oscillator; пЂ 
no crystal oscillator required Atomic Set, Clear and Invert Operation on Select
Peripheral Registers High-Current Sink/Source Independent, Low-Power 32 kHz Timer Oscillator Three 4-Wire SPI modules:
-16-byte FIFO
-Variable width
-I2S mode Three I2C Master and Slave w/Address Masking and
IPMI Support Three Enhanced Addressable UARTs:
-RS-232, RS-485 and LIN/J2602 support
-IrDAВ® with on-chip hardware encoder and decoder External Edge and Level Change Interrupt on All Ports Hardware Real-Time Clock and Calendar (RTCC) Up to 24 Peripheral Pin Select (PPS) Remappable Pins 21 Total 16-Bit Timers:
-Three dedicated 16-bit timers/counters
-Two can be concatenated to form a 32-bit timer
-Two additional 16-bit timers in each MCCP and
SCCP module, totaling 18 Capture/Compare/PWM/Timer modules:
-Two 16-bit timers or one 32-bit timer in each module
-PWM resolution down to 21 ns
-Three Multiple Output (MCCP) modules:
-Flexible configuration as PWM, input capture, …