Datasheet Linear Technology LT6557IGN#PBF — Datenblatt

Hersteller	Linear Technology
Serie	LT6557
Artikelnummer	LT6557IGN#PBF

500 MHz, 2200 V / µs Verstärkung von 2, dreifacher Einzelversorgungs-Videoverstärker mit Eingangsvorspannungssteuerung

Datenblätter

Vorschau und Herunterladen

PDF, 615 Kb, Sprache: en, Datei hochgeladen: Aug 6, 2017, Seiten: 12
500MHz, 2200V/µs Gain of 2, Single Supply Triple Video Amplifier with Input Bias Control

Auszug aus dem Dokument

Preise

Verpackung

Package	SSOP-16
Package Code	GN
Package Index	05-08-1641 (GN16)

Parameter

Av Min Stable	2 V/V
Number of Channels	3
Demo Boards	DC1016A-A,DC1016A-B
Design Tools	LTspice Model
Enoise Density	12 nV/rtHz
Export Control	no
GBW	500 MHz
Gain Accuracy	0.5 %
Ibias	70 µA
Inoise	20 pA/rtHz
Iout	100 mA
Isupply	22.5 mA
Operating Temperature Range	-40 to 85 °C
PSRR	50 dB
Rail-to-Rail In	no
Rail-to-Rail Out	no
SR	2200 V/µs
Shutdown	yes
Single Supply	no
Ts (0.1%)	7 ns
Type	VIDEO
Voh (from V+)	0.8 V
Vol (from V-)	0.8 V
Vos	12 mV
Vs Max	7.5 V
Vs Min	3 V

Öko-Plan

RoHS

Compliant

Konstruktionshinweise

Herunterladen
High Resolution Video Solutions Using Single 5V Power &mdash DN396
PDF, 89 Kb, Datei veröffentlicht: Aug 2, 2006
Auszug aus dem Dokument
High Resolution Video Solutions Using Single 5V Power
Design Note 396
Jon Munson
Introduction
Video cable driver ampliп¬Ѓer output stages traditionally
require a supply voltage of at least 6V in order to provide
the required output swing. This requirement is usually
met with 5V supplies by adding a boost regulator or a
small local negative rail, say via the popular LTВ®1983-3.
Such additional circuitry is unnecessary in typical 1VP-P
video connections, such as HD component video, if the
cable driver ampliп¬Ѓers simply offer near rail-to-rail output
capability when powered from 5V.
Standard deп¬Ѓnition and SVGA (800 Г— 600 pixel) low voltage
devices have been available from Linear Technology for
some time (see Design Note 327), but a number of recent
device developments have made it possible to produce
high resolution video devices that operate on a single 5V power supply. Some parts that п¬Ѓt this mold include the
LT6556, a UXGA-resolution (1600 Г— 1200 pixel) RGB 2:1
input-port buffered multiplexer (MUX); the LT6557 and
LT6558 UXGA п¬Ѓxed gain triple ampliп¬Ѓers that include
on-chip biasing to minimize external part count; and the
LT6559 triple ampliп¬Ѓer that provides п¬‚exible, cost effective …

Artikel

Herunterladen
Triple Amps Handle High-Res Workstation Video from Single Supplies &mdash LT Journal
PDF, 229 Kb, Datei veröffentlicht: Nov 21, 2006
Auszug aus dem Dokument
DESIGN IDEAS L Triple Amps Handle High-Res
Workstation Video from
Single Supplies
Introduction
Cutting edge, high resolution workstation displays demand cutting edge
bandwidth and slew rate specs of their
video ampliп¬Ѓers. Displays supporting
1920 Г— 1200 pixels, for example, must
handle over 200Mpixels/s, less than
п¬Ѓve nanoseconds per pixel! System
supply voltages have also been dropping in order to accommodate the new,
faster digital processor technologies.
Historically the fast ampliп¬Ѓers used for
these formats required a total power
supply of at least 6V, particularly in
cable driver applications. Enter the
LT6557 and LT6558, ultra-fast triple
video ampliп¬Ѓers with internally п¬Ѓxed
gains of two and unity, respectively.
These devices have been speciп¬Ѓcally
engineered to operate on single supply voltages down to 3.3V and yet
maintain high bandwidth. Now it is
practical to use a low voltage digital …

Modellreihe

Serie: LT6557 (8)

LT6557CDHC#PBF LT6557CDHC#TRPBF LT6557CGN#PBF LT6557CGN#TRPBF LT6557IDHC#PBF LT6557IDHC#TRPBF LT6557IGN#PBF LT6557IGN#TRPBF

Herstellerklassifikation

Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > High Speed Amplifiers (GBW > 50MHz) | High Output Current Amplifiers (>100mA)
Signal Conditioning > Amplifiers > Video Functions

Andere Namen:

LT6557IGNPBF, LT6557IGN PBF