Datasheet Texas Instruments TLC7733M — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TLC7733M |
Einzelner SVS für 3,3-V-Systeme mit programmierbarer Zeitverzögerung
Datenblätter
MicroPower Supply Voltage Supervisors. datasheet
PDF, 1.9 Mb, Revision: M, Datei veröffentlicht: Mar 19, 2012
Auszug aus dem Dokument
Preise
Status
| 5962-9750901Q2A | 5962-9750901QPA | TLC7733MFKB | TLC7733MJG | TLC7733MJGB | |
|---|---|---|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | No | No | No | No |
Verpackung
| 5962-9750901Q2A | 5962-9750901QPA | TLC7733MFKB | TLC7733MJG | TLC7733MJGB | |
|---|---|---|---|---|---|
| N | 1 | 2 | 3 | 4 | 5 |
| Pin | 20 | 8 | 20 | 8 | 8 |
| Package Type | FK | JG | FK | JG | JG |
| Industry STD Term | LCCC | CDIP | LCCC | CDIP | CDIP |
| JEDEC Code | S-CQCC-N | R-GDIP-T | S-CQCC-N | R-GDIP-T | R-GDIP-T |
| Package QTY | 1 | 1 | 1 | 1 | 1 |
| Carrier | TUBE | TUBE | TUBE | TUBE | TUBE |
| Device Marking | MFKB | TLC7733M | 5962- | MJG | TLC7733M |
| Width (mm) | 8.89 | 6.67 | 8.89 | 6.67 | 6.67 |
| Length (mm) | 8.89 | 9.6 | 8.89 | 9.6 | 9.6 |
| Thickness (mm) | 1.83 | 4.57 | 1.83 | 4.57 | 4.57 |
| Pitch (mm) | 1.27 | 2.54 | 1.27 | 2.54 | 2.54 |
| Max Height (mm) | 2.03 | 5.08 | 2.03 | 5.08 | 5.08 |
| Mechanical Data | Herunterladen | Herunterladen | Herunterladen | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | 5962-9750901Q2A | 5962-9750901QPA | TLC7733MFKB | TLC7733MJG | TLC7733MJGB |
|---|---|---|---|---|---|
| # of Supplies Monitored | 1 | 1 | 1 | 1 | 1 |
| Iq(Typ), uA | 9 | 9 | 9 | 9 | 9 |
| Monitored Voltage 1 (typ)(Nom), V | 3.3 | 3.3 | 3.3 | 3.3 | 3.3 |
| Operating Temperature Range, C | -55 to 125 | -55 to 125 | -55 to 125 | -55 to 125 | -55 to 125 |
| Output Driver Type / Reset Output | Active-high,Active-low,Push-pull | Active-high,Active-low,Push-pull | Active-high,Active-low,Push-pull | Active-high,Active-low,Push-pull | Active-high,Active-low,Push-pull |
| Package Group | LCCC | CDIP | LCCC | CDIP | CDIP |
| Package Size: mm2:W x L, PKG | 20LCCC: 79 mm2: 8.89 x 8.89(LCCC) | See datasheet (CDIP) | 20LCCC: 79 mm2: 8.89 x 8.89(LCCC) | See datasheet (CDIP) | See datasheet (CDIP) |
| Rating | Military | Military | Military | Military | Military |
| Reset Threshold Accuracy, % | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 |
| Threshold Voltage 1(Typ), V | 2.93 | 2.93 | 2.93 | 2.93 | 2.93 |
| Threshold Voltage 2 (typ)(Typ), V | N/A | N/A | N/A | N/A | N/A |
| Time Delay, ms | Programmable | Programmable | Programmable | Programmable | Programmable |
| VCC(Max), V | 6 | 6 | 6 | 6 | 6 |
| VCC(Min), V | 2 | 2 | 2 | 2 | 2 |
| Watchdog Timer WDI, sec | None | None | None | None | None |
Öko-Plan
| 5962-9750901Q2A | 5962-9750901QPA | TLC7733MFKB | TLC7733MJG | TLC7733MJGB | |
|---|---|---|---|---|---|
| RoHS | See ti.com | See ti.com | See ti.com | See ti.com | See ti.com |
Anwendungshinweise
- Reset Circuit for the TMS320C6000 DSP (Rev. A)PDF, 36 Kb, Revision: A, Datei veröffentlicht: Jun 10, 1999
This document describes two solutions used to provide a reset circuit to the Texas Instruments (TI)(tm) TMS320C6000 digital signal processor (DSP). One solution sets a supply voltage supervisor, such as the TI TLC7733 and TLC7725, on each of the supply voltages, DVdd and CVdd. Another solution monitors both the 2.5-V/1.8-V and 3.3-V power supplies using a single supervisor such as the TI TPS3707.
Modellreihe
Serie: TLC7733M (5)
Herstellerklassifikation
- Semiconductors> Space & High Reliability> Power Management Products> Supervisor and Reset ICs