Datasheet Texas Instruments THS9001 — Datenblatt
Hersteller | Texas Instruments |
Serie | THS9001 |
Kaskadierbarer Verstärker mit 50 MHz bis 750 MHz
Datenblätter
50 MHz to 750 MHz Casadeable Amplifier datasheet
PDF, 1.1 Mb, Revision: C, Datei veröffentlicht: Dec 2, 2013
Auszug aus dem Dokument
Preise
Status
THS9001DBVT | THS9001DBVTG4 | |
---|---|---|
Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
Manufacture's Sample Availability | No | No |
Verpackung
THS9001DBVT | THS9001DBVTG4 | |
---|---|---|
N | 1 | 2 |
Pin | 6 | 6 |
Package Type | DBV | DBV |
Industry STD Term | SOT-23 | SOT-23 |
JEDEC Code | R-PDSO-G | R-PDSO-G |
Package QTY | 250 | 250 |
Carrier | SMALL T&R | SMALL T&R |
Device Marking | NWL | NWL |
Width (mm) | 1.6 | 1.6 |
Length (mm) | 2.9 | 2.9 |
Thickness (mm) | 1.2 | 1.2 |
Pitch (mm) | .95 | .95 |
Max Height (mm) | 1.45 | 1.45 |
Mechanical Data | Herunterladen | Herunterladen |
Parameter
Parameters / Models | THS9001DBVT | THS9001DBVTG4 |
---|---|---|
Current Consumption, mA | 100 | 100 |
Frequency(Max), MHz | 750 | 750 |
Frequency(Min), MHz | 50 | 50 |
Gain(Typ), dB | 15.5 | 15.5 |
Impedance Match, Ohms | 50 | 50 |
Noise Figure(Typ), dB | 4 | 4 |
Number of Channels | 1 | 1 |
Operating Temperature Range, C | -40 to 85 | -40 to 85 |
Output Enable | No | No |
Output IP3(Typ), dBm | 36 | 36 |
P1dB(Typ), dBm | 20.6 | 20.6 |
Package Group | SOT-23 | SOT-23 |
Package Size: mm2:W x L, PKG | 6SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) | 6SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) |
Power Down | No | No |
Supply(Typ), V | 3-5 | 3-5 |
Öko-Plan
THS9001DBVT | THS9001DBVTG4 | |
---|---|---|
RoHS | Compliant | Compliant |
Anwendungshinweise
- Driving High-Speed ADCs: Circuit Topologies and System-Level Parameters (Rev. A)PDF, 327 Kb, Revision: A, Datei veröffentlicht: Sep 10, 2010
This application report discusses the performance-related aspects of passive and active interfaces at the analog input of high-speed pipeline analog-to-digital converters (ADCs). The report simplifies the many possibilities into two main categories: passive and active interface circuits. The first section of the report gives an overview of equivalent models of buffered and unbuffered ADC input cir - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Modellreihe
Serie: THS9001 (2)
Herstellerklassifikation
- Semiconductors> Amplifiers> Special Function Amplifiers> RF Gain Block Amplifiers