Datasheet Texas Instruments THS6053 — Datenblatt

Hersteller	Texas Instruments
Serie	THS6053

Datenblätter

Preise

Status

Verpackung

Parameter

Parameters / Models	THS6053CPWPR	THS6053ID	THS6053IPWP	THS6053IPWPR
Acl, min spec gain, V/V	1		1	1
Acl, min spec gain(V/V)		1
Additional Features	Shutdown	Shutdown	Shutdown	Shutdown
Approx. Price (US$)		3.33 | 1ku
Architecture	Current FB	Current FB	Current FB	Current FB
BW @ Acl, MHz	170		170	170
BW @ Acl(MHz)		170
CMRR(Min), dB	59		59	59
CMRR(Min)(dB)		59
CMRR(Typ), dB	66		66	66
CMRR(Typ)(dB)		66
GBW(Typ), MHz	170		170	170
GBW(Typ)(MHz)		170
Input Bias Current(Max), pA	10000000		10000000	10000000
Input Bias Current(Max)(pA)		10000000
Iq per channel(Max), mA	7		7	7
Iq per channel(Max)(mA)		7
Iq per channel(Typ), mA	5.2		5.2	5.2
Iq per channel(Typ)(mA)		5.2
Number of Channels	2		2	2
Number of Channels(#)		2
Offset Drift(Typ), uV/C	30		30	30
Offset Drift(Typ)(uV/C)		30
Operating Temperature Range, C	-40 to 85,0 to 70		-40 to 85,0 to 70	-40 to 85,0 to 70
Operating Temperature Range(C)		-40 to 85 0 to 70
Output Current(Typ), mA	175		175	175
Output Current(Typ)(mA)		175
Package Group	HTSSOP	SOIC	HTSSOP	HTSSOP
Package Size: mm2:W x L, PKG	14HTSSOP: 32 mm2: 6.4 x 5(HTSSOP)		14HTSSOP: 32 mm2: 6.4 x 5(HTSSOP)	14HTSSOP: 32 mm2: 6.4 x 5(HTSSOP)
Package Size: mm2:W x L (PKG)		14SOIC: 52 mm2: 6 x 8.65(SOIC)
Rail-to-Rail	No	No	No	No
Rating	Catalog	Catalog	Catalog	Catalog
Slew Rate(Typ), V/us	1700		1700	1700
Slew Rate(Typ)(V/us)		1700
Total Supply Voltage(Max), +5V=5, +/-5V=10	33		33	33
Total Supply Voltage(Max)(+5V=5, +/-5V=10)		33
Total Supply Voltage(Min), +5V=5, +/-5V=10	9		9	9
Total Supply Voltage(Min)(+5V=5, +/-5V=10)		9
Vn at Flatband(Typ), nV/rtHz	2.1		2.1	2.1
Vn at Flatband(Typ)(nV/rtHz)		2.1
Vos (Offset Voltage @ 25C)(Max), mV	10		10	10
Vos (Offset Voltage @ 25C)(Max)(mV)		10

Öko-Plan

Anwendungshinweise

• Herunterladen
  Active Output Impedance for ADSL Line Drivers
  PDF, 636 Kb, Datei veröffentlicht: Nov 26, 2002
  Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the
• Herunterladen
  Noise Analysis for High Speed Op Amps (Rev. A)
  PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
  As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Modellreihe

Herstellerklassifikation

• Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)