Datasheet Texas Instruments TCAN1042HGVDQ1 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TCAN1042HGV-Q1 |
| Artikelnummer | TCAN1042HGVDQ1 |
Kfz-fehlergeschützter CAN-Transceiver mit flexibler Datenrate 8-SOIC -55 bis 125
Datenblätter
TCAN1042-Q1 Automotive Fault Protected CAN Transceiver with CAN FD datasheet
PDF, 585 Kb, Revision: B, Datei veröffentlicht: May 30, 2017
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 75 |
| Carrier | TUBE |
| Device Marking | 1042V |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Herunterladen |
Parameter
| Bus Fault Voltage | -70 to 70 V |
| Common Mode Voltage | -30 to 30 V |
| Features | CAN FD,High Speed,Short Prop Delay,Bus Wake Up,VIO Pin |
| HBM ESD | 16 kV |
| IEC 61000-4-2 Contact | 15 +/- kV |
| Isolated | No |
| Low Power Mode | Standby |
| Operating Temperature Range | -55 to 125 C |
| Package Group | SOIC |
| Protocols | CAN |
| Rating | Automotive |
| Signaling Rate(Max) | 5 Mbps |
| Supply Voltage(s) | 4.5 to 5.5 V |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: TCAN1042DEVM
TCAN10xx Controller Area Network (CAN) Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: IWR1642BOOST
IWR1642 Single-Chip 76-to-81GHz mmWave Sensor Integrating DSP and MCU Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: AWR1642BOOST
AWR1642 Single-Chip 76-to-81GHz Automotive Radar Sensor Integrating DSP and MCU Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Modellreihe
Serie: TCAN1042HGV-Q1 (4)
- TCAN1042HGVDQ1 TCAN1042HGVDRBRQ1 TCAN1042HGVDRBTQ1 TCAN1042HGVDRQ1
Herstellerklassifikation
- Semiconductors > Interface > CAN/LIN