Datasheet Texas Instruments SN74LVC16374 — Datenblatt

HerstellerTexas Instruments
SerieSN74LVC16374
Datasheet Texas Instruments SN74LVC16374

16-Bit-kantengetriggertes D-Flip-Flop mit 3-Zustands-Ausgängen

Datenblätter

16-Bit Edge-Triggered D-Type Flip-Flop With 3-State Outputs datasheet
PDF, 695 Kb, Revision: B, Datei veröffentlicht: Jul 1, 1995
Auszug aus dem Dokument

Preise

Status

SN74LVC16374DGGRSN74LVC16374DLSN74LVC16374DLR
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoNoNo

Verpackung

SN74LVC16374DGGRSN74LVC16374DLSN74LVC16374DLR
N123
Pin484848
Package TypeDGGDLDL
Industry STD TermTSSOPSSOPSSOP
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY2000251000
CarrierLARGE T&RTUBELARGE T&R
Device MarkingLVC16374LVC16374LVC16374
Width (mm)6.17.497.49
Length (mm)12.515.8815.88
Thickness (mm)1.152.592.59
Pitch (mm).5.635.635
Max Height (mm)1.22.792.79
Mechanical DataHerunterladenHerunterladenHerunterladen

Parameter

Parameters / ModelsSN74LVC16374DGGR
SN74LVC16374DGGR
SN74LVC16374DL
SN74LVC16374DL
SN74LVC16374DLR
SN74LVC16374DLR
3-State OutputYesYesYes
Bits161616
F @ Nom Voltage(Max), Mhz100100100
ICC @ Nom Voltage(Max), mA0.040.040.04
Operating Temperature Range, C-40 to 85-40 to 85-40 to 85
Output Drive (IOL/IOH)(Max), mA24/-2424/-2424/-24
Package GroupTSSOPSSOPSSOP
Package Size: mm2:W x L, PKG48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)48SSOP: 164 mm2: 10.35 x 15.88(SSOP)48SSOP: 164 mm2: 10.35 x 15.88(SSOP)
RatingCatalogCatalogCatalog
Schmitt TriggerNoNoNo
Technology FamilyLVCLVCLVC
VCC(Max), V3.63.63.6
VCC(Min), V2.72.72.7
Voltage(Nom), V2.7,3.32.7,3.32.7,3.3
tpd @ Nom Voltage(Max), ns8.5,7.58.5,7.58.5,7.5

Öko-Plan

SN74LVC16374DGGRSN74LVC16374DLSN74LVC16374DLR
RoHSCompliantCompliantCompliant

Anwendungshinweise

  • LVC Characterization Information
    PDF, 114 Kb, Datei veröffentlicht: Dec 1, 1996
    This document provides characterization information about low-voltage logic (LVL) that operates from a 3.3-V power supply. It addresses the issues of interfacing to 5-V logic ac performance power considerations input and output characteristics and signal integrity for this family of devices.
  • Use of the CMOS Unbuffered Inverter in Oscillator Circuits
    PDF, 796 Kb, Datei veröffentlicht: Nov 6, 2003
    CMOS devices have a high input impedance high gain and high bandwidth. These characteristics are similar to ideal amplifier characteristics and hence a CMOS buffer or inverter can be used in an oscillator circuit in conjunction with other passive components. Now CMOS oscillator circuits are widely used in high-speed applications because they are economical easy to use and take significantly

Modellreihe

Herstellerklassifikation

  • Semiconductors> Logic> Flip-Flop/Latch/Register> D-Type Flip-Flop