Datasheet Texas Instruments SN54BCT373 — Datenblatt

HerstellerTexas Instruments
SerieSN54BCT373
Datasheet Texas Instruments SN54BCT373

Oktale transparente D-Latches mit 3-Zustands-Ausgängen

Datenblätter

SN54BCT373, SN74BCT373 datasheet
PDF, 230 Kb, Revision: D, Datei veröffentlicht: Mar 11, 2003
Auszug aus dem Dokument

Preise

Status

5962-9074601M2A5962-9074601MRASNJ54BCT373FKSNJ54BCT373J
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoNoNoNo

Verpackung

5962-9074601M2A5962-9074601MRASNJ54BCT373FKSNJ54BCT373J
N1234
Pin20202020
Package TypeFKJFKJ
Industry STD TermLCCCCDIPLCCCCDIP
JEDEC CodeS-CQCC-NR-GDIP-TS-CQCC-NR-GDIP-T
Package QTY1111
CarrierTUBETUBETUBETUBE
Width (mm)8.896.928.896.92
Length (mm)8.8924.28.8924.2
Thickness (mm)1.834.571.834.57
Pitch (mm)1.272.541.272.54
Max Height (mm)2.035.082.035.08
Mechanical DataHerunterladenHerunterladenHerunterladenHerunterladen
Device Marking5962-SNJ54BCT373J

Parameter

Parameters / Models5962-9074601M2A
5962-9074601M2A
5962-9074601MRA
5962-9074601MRA
SNJ54BCT373FK
SNJ54BCT373FK
SNJ54BCT373J
SNJ54BCT373J
3-State OutputYesYesYesYes
Bits8888
F @ Nom Voltage(Max), Mhz70707070
ICC @ Nom Voltage(Max), mA60606060
Input TypeTTLTTLTTLTTL
Operating Temperature Range, C-55 to 125-55 to 125-55 to 125-55 to 125
Output Drive (IOL/IOH)(Max), mA64/-1564/-1564/-1564/-15
Output TypeTTLTTLTTLTTL
Package GroupLCCCCDIPLCCCCDIP
Package Size: mm2:W x L, PKG20LCCC: 79 mm2: 8.89 x 8.89(LCCC)See datasheet (CDIP)20LCCC: 79 mm2: 8.89 x 8.89(LCCC)See datasheet (CDIP)
RatingMilitaryMilitaryMilitaryMilitary
Technology FamilyBCTBCTBCTBCT
VCC(Max), V5.55.55.55.5
VCC(Min), V4.54.54.54.5
tpd @ Nom Voltage(Max), ns9.59.59.59.5

Öko-Plan

5962-9074601M2A5962-9074601MRASNJ54BCT373FKSNJ54BCT373J
RoHSSee ti.comSee ti.comSee ti.comSee ti.com

Anwendungshinweise

  • Input and Output Characteristics of Digital Integrated Circuits
    PDF, 1.7 Mb, Datei veröffentlicht: Oct 1, 1996
    This report contains a comprehensive collection of the input and output characteristic curves of typical integrated circuits from various logic families. These curves go beyond the information given in data sheets by providing additional details regarding the characteristics of the components. This knowledge is particularly useful when for example a decision must be made as to which circuit shou
  • Power-Up Behavior of Clocked Devices (Rev. A)
    PDF, 34 Kb, Revision: A, Datei veröffentlicht: Feb 6, 2015
  • TI IBIS File Creation Validation and Distribution Processes
    PDF, 380 Kb, Datei veröffentlicht: Aug 29, 2002
    The Input/Output Buffer Information Specification (IBIS) also known as ANSI/EIA-656 has become widely accepted among electronic design automation (EDA) vendors semiconductor vendors and system designers as the format for digital electrical interface data. Because IBIS models do not reveal proprietary internal processes or architectural information semiconductor vendors? support for IBIS con
  • Live Insertion
    PDF, 150 Kb, Datei veröffentlicht: Oct 1, 1996
    Many applications require the ability to exchange modules in electronic systems without removing the supply voltage from the module (live insertion). For example an electronic telephone exchange must always remain operational even during module maintenance and repair. To avoid damaging components additional circuitry modifications are necessary. This document describes in detail the phenomena tha
  • Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A)
    PDF, 105 Kb, Revision: A, Datei veröffentlicht: Aug 1, 1997
    The spectrum of bus-interface devices with damping resistors or balanced/light output drive currently offered by various logic vendors is confusing at best. Inconsistencies in naming conventions and methods used for implementation make it difficult to identify the best solution for a given application. This report attempts to clarify the issue by looking at several vendors? approaches and discussi
  • Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)
    PDF, 614 Kb, Revision: C, Datei veröffentlicht: Dec 2, 2015
  • Semiconductor Packing Material Electrostatic Discharge (ESD) Protection
    PDF, 337 Kb, Datei veröffentlicht: Jul 8, 2004
    Forty-eight-pin TSSOP components that were packaged using Texas Instruments (TI) standard packing methodology were subjected to electrical discharges between 0.5 and 20 kV as generated by an IEC ESD simulator to determine the level of ISD protection provided by the packing materials. The testing included trays tape and reel and magazines. Additional units were subjected to the same discharge
  • Designing With Logic (Rev. C)
    PDF, 186 Kb, Revision: C, Datei veröffentlicht: Jun 1, 1997
    Data sheets which usually give information on device behavior only under recommended operating conditions may only partially answer engineering questions that arise during the development of systems using logic devices. However information is frequently needed regarding the behavior of the device outside the conditions in the data sheet. Such questions might be:?How does a bus driver behave w
  • Introduction to Logic
    PDF, 93 Kb, Datei veröffentlicht: Apr 30, 2015
  • Implications of Slow or Floating CMOS Inputs (Rev. D)
    PDF, 260 Kb, Revision: D, Datei veröffentlicht: Jun 23, 2016

Modellreihe

Herstellerklassifikation

  • Semiconductors> Space & High Reliability> Logic Products> Flip-Flop/Latch/Registers