Datasheet Texas Instruments 8301902EA — Datenblatt
Hersteller | Texas Instruments |
Serie | SN54ALS175 |
Artikelnummer | 8301902EA |
Vierfache D-Flip-Flops mit klarem 16-CDIP -55 bis 125
Datenblätter
Hex/Quadruple D-Type Flip-Flops With Clear datasheet
PDF, 848 Kb, Revision: E, Datei veröffentlicht: May 23, 2002
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Verpackung
Pin | 16 | 16 |
Package Type | J | J |
Industry STD Term | CDIP | CDIP |
JEDEC Code | R-GDIP-T | R-GDIP-T |
Package QTY | 1 | 1 |
Carrier | TUBE | TUBE |
Device Marking | 8301902EA | SNJ54ALS175J |
Width (mm) | 6.92 | 6.92 |
Length (mm) | 19.56 | 19.56 |
Thickness (mm) | 4.57 | 4.57 |
Pitch (mm) | 2.54 | 2.54 |
Max Height (mm) | 5.08 | 5.08 |
Mechanical Data | Herunterladen | Herunterladen |
Parameter
3-State Output | No |
Bits | 4 |
F @ Nom Voltage(Max) | 75 Mhz |
ICC @ Nom Voltage(Max) | 14 mA |
Input Type | TTL |
Operating Temperature Range | -55 to 125 C |
Output Drive (IOL/IOH)(Max) | 8/-0.4 mA |
Output Type | TTL |
Package Group | CDIP |
Package Size: mm2:W x L | See datasheet (CDIP) PKG |
Rating | Military |
Technology Family | ALS |
VCC(Max) | 5.5 V |
VCC(Min) | 4.5 V |
tpd @ Nom Voltage(Max) | 17 ns |
Öko-Plan
RoHS | See ti.com |
Anwendungshinweise
- Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A)PDF, 105 Kb, Revision: A, Datei veröffentlicht: Aug 1, 1997
The spectrum of bus-interface devices with damping resistors or balanced/light output drive currently offered by various logic vendors is confusing at best. Inconsistencies in naming conventions and methods used for implementation make it difficult to identify the best solution for a given application. This report attempts to clarify the issue by looking at several vendors? approaches and discussi - Advanced Schottky (ALS and AS) Logic FamiliesPDF, 1.9 Mb, Datei veröffentlicht: Aug 1, 1995
This document introduces the advanced Schottky family of clamped TTL integrated circuits (ICs). Detailed electrical characteristics of the 'AS and 'ALS devices with table formats are provided. Guidelines for designing high-performance digital systems using the Advanced Schottky family are given along with a brief summary of the solutions to most design decisions needed to implement systems using t - Live InsertionPDF, 150 Kb, Datei veröffentlicht: Oct 1, 1996
Many applications require the ability to exchange modules in electronic systems without removing the supply voltage from the module (live insertion). For example an electronic telephone exchange must always remain operational even during module maintenance and repair. To avoid damaging components additional circuitry modifications are necessary. This document describes in detail the phenomena tha - Input and Output Characteristics of Digital Integrated CircuitsPDF, 1.7 Mb, Datei veröffentlicht: Oct 1, 1996
This report contains a comprehensive collection of the input and output characteristic curves of typical integrated circuits from various logic families. These curves go beyond the information given in data sheets by providing additional details regarding the characteristics of the components. This knowledge is particularly useful when for example a decision must be made as to which circuit shou - Power-Up Behavior of Clocked Devices (Rev. A)PDF, 34 Kb, Revision: A, Datei veröffentlicht: Feb 6, 2015
- Designing With Logic (Rev. C)PDF, 186 Kb, Revision: C, Datei veröffentlicht: Jun 1, 1997
Data sheets which usually give information on device behavior only under recommended operating conditions may only partially answer engineering questions that arise during the development of systems using logic devices. However information is frequently needed regarding the behavior of the device outside the conditions in the data sheet. Such questions might be:?How does a bus driver behave w
Modellreihe
Serie: SN54ALS175 (7)
Herstellerklassifikation
- Semiconductors > Space & High Reliability > Logic Products > Flip-Flop/Latch/Registers