Datasheet Texas Instruments REG710-33 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | REG710-33 |
30-mA-DC / DC-Wandler mit Schaltkappe und festem 3,3-V-Ausgang
Datenblätter
REG710xx Buck-Boost Charge Pump with up to 60-mA Output Current datasheet
PDF, 1.2 Mb, Revision: H, Datei veröffentlicht: Oct 30, 2015
Auszug aus dem Dokument
Preise
Status
| REG710NA-3.3/250 | REG710NA-3.3/250G4 | REG710NA-3.3/3K | |
|---|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | No | Yes |
Verpackung
| REG710NA-3.3/250 | REG710NA-3.3/250G4 | REG710NA-3.3/3K | |
|---|---|---|---|
| N | 1 | 2 | 3 |
| Pin | 6 | 6 | 6 |
| Package Type | DBV | DBV | DBV |
| Industry STD Term | SOT-23 | SOT-23 | SOT-23 |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 250 | 250 | 3000 |
| Carrier | SMALL T&R | SMALL T&R | LARGE T&R |
| Device Marking | R10C | R10C | R10C |
| Width (mm) | 1.6 | 1.6 | 1.6 |
| Length (mm) | 2.9 | 2.9 | 2.9 |
| Thickness (mm) | 1.2 | 1.2 | 1.2 |
| Pitch (mm) | .95 | .95 | .95 |
| Max Height (mm) | 1.45 | 1.45 | 1.45 |
| Mechanical Data | Herunterladen | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | REG710NA-3.3/250 | REG710NA-3.3/250G4 | REG710NA-3.3/3K |
|---|---|---|---|
| Iout(Max), A | 0.03 | 0.03 | 0.03 |
| Iq(Typ), mA | 0.065 | 0.065 | 0.065 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 | -40 to 85 |
| Package Group | SOT-23 | SOT-23 | SOT-23 |
| Rating | Catalog | Catalog | Catalog |
| Special Features | Enable | Enable | Enable |
| Switching Frequency(Max), kHz | 1000 | 1000 | 1000 |
| Switching Frequency(Min), kHz | 1000 | 1000 | 1000 |
| Topology | Buck/Boost | Buck/Boost | Buck/Boost |
| Type | Charge Pump | Charge Pump | Charge Pump |
| Vin(Max), V | 5.5 | 5.5 | 5.5 |
| Vin(Min), V | 1.8 | 1.8 | 1.8 |
| Vout(Max), V | 3.3 | 3.3 | 3.3 |
| Vout(Min), V | 3.3 | 3.3 | 3.3 |
Öko-Plan
| REG710NA-3.3/250 | REG710NA-3.3/250G4 | REG710NA-3.3/3K | |
|---|---|---|---|
| RoHS | Compliant | Compliant | Compliant |
Anwendungshinweise
- Optimizing Output Voltage Ripple for the REG710PDF, 56 Kb, Datei veröffentlicht: Feb 10, 2003
Many portable power applications require a power source that has buck?boost capability with low output ripple. For this application, the REG710 is a prime choice; however understanding the affects of the pump and output capacitors allows designers to take full advantage of theREG710?s capabilities in order to minimize output voltage ripple. - Using the TPS3619 with MSP430 Microcontrollers Can Reduce Sys Power Consumption (Rev. A)PDF, 37 Kb, Revision: A, Datei veröffentlicht: May 19, 2003
The MSP430 series of microcontrollers are ideal in applications where battery life is critical. These microcontollers require only 0.1?A of current in low-power RAM retention mode; In this mode the microcontroller must have power to retain volatile memory. In some systems with charge pumps, the TPS3619 can be used to shut down the charge pump, saving system power consumption.
Modellreihe
Serie: REG710-33 (3)
Herstellerklassifikation
- Semiconductors> Power Management> Non-isolated DC/DC Switching Regulator> Buck/Boost, Inverting or Split-Rail> Buck/Boost or Inverting Charge Pump (Inductorless)