Datasheet Texas Instruments PTH12050LAST — Datenblatt

PTH12050W/L
www.ti.com SLTS214H – MAY 2003 – REVISED OCTOBER 2007 6-A, 12-V INPUT NON-ISOLATED WIDE-OUTPUT
ADJUST POWER MODULE
FEATURES APPLICATIONS Up to 6-A Output Current 12-V Input Voltage Wide-Output Voltage Adjust
(1.2 V to 5.5 V)/(0.8 V to 1.8 V) Efficiencies up to 93% 200 W/in3 Power Density On/Off Inhibit Undervoltage Lockout Operating Temperature: –40°C to 85°C Auto-Track™ Sequencing Output Overcurrent Protection
(Nonlatching, Auto-Reset) Safety Agency Approvals:
UL/IEC/CSA-22.2 60950-1 Point-of-Load Alliance (POLAв„ў) Compatible 1 2 Telecom, Industrial, and General-Purpose
Circuits NOMINAL SIZE = 0.87 i x 0.5 i
(22,1 mm x 12,57 mm) DESCRIPTION
The PTH12050 series is the smallest non-isolated power modules that features Auto-Trackв„ў Sequencing.
Auto-Track simplifies the sequencing of supply voltages in power systems by enabling modules to track each
other, or any other external voltage, during power up and power down.
Although small in size (0.87 inches Г— 0.5 inches), these modules are rated for up to 6 A of output current, and
are an ideal choice in applications where space, performance, and a power-up sequencing capability are
important attributes.
The series operates from an input voltage of 12-V to provide step-down conversion to a wide range of output
voltages. The output voltage of the W-suffix device may set to any voltage over the adjust range, 1.2 V to 5.5 V.
The L-suffix device has an adjustment range of 0.8 V to 1.8 V. The output voltage is set within the adjustment
range using a single external resistor.
Other operating features include an on/off inhibit, output voltage adjust (trim), and output overcurrent protection.
For high efficiency, these parts employ a synchronous rectifier output stage.
Target applications include telecom, industrial, and general purpose circuits, including low-power dual-voltage
systems that use the TMS320в„ў DSP family, microprocessor, ASIC, or FPGA. …