Datasheet Texas Instruments PTH12030W — Datenblatt

Hersteller	Texas Instruments
Serie	PTH12030W

1,2 bis 5,5 V 26-A, 12-V-Eingang, nicht isoliertes Wide-Adjust-Modul

Datenblätter

Herunterladen

PDF, 795 Kb, Revision: I, Datei veröffentlicht: Mar 11, 2009

Auszug aus dem Dokument

PTH12030W/L
www.ti.com . SLTS211H вЂ“ MAY 2003 вЂ“ REVISED DECEMBER 2008 26-A, 12-V INPUT NON-ISOLATED WIDE-OUTPUT
ADJUST POWER MODULE
FEATURES APPLICATIONS Up to 26 A Output Current 12-V Input Voltage Wide-Output Voltage Adjust
(1.2 V to 5.5 V) / (0.8 V to 1.8 V) Efficiencies up to 94% 235 W/in3 Power Density On/Off Inhibit Output Voltage Sense Prebias Startup Margin Up/Down Controls Dual-Phase Topology Auto-Trackв„ў Sequencing Undervoltage Lockout Output Overcurrent Protection
(Non-Latching, Auto-Reset) Overtemperature Protection Operating Temperature: вЂ“40В°C to 85В°C Safety Agency Approvals:
UL/IEC/CSA-C22.2 60950-1 Point of Load Alliance (POLA) Compatible 1 2 Multi-voltage, multi-processor systems Nominal Size = 1.37 in x 1.12 in
(34,8 mm x 28,5 mm) DESCRIPTION
The PTH12030 is a series of high current, non-isolated power module from Texas Instruments. This product is
characterized by high efficiencies, and up to 26 A of output current, while occupying a small PCB area of
1.64 in2. In terms of cost, size, and performance, the series provides OEMвЂ™s with a flexible module that meets the
requirements of the most complex and demanding mixed-signal applications. These include the most densly
populated, multiprocessor systems that incorporate the high-speed TMS320в„ў DSP family, microprocessors, and
ASICs.
The series uses double-sided surface mount construction and provides high-performance step-down power
conversion from a 12-V input bus voltage. The output voltage of the W-suffix parts can be set to any value over
the range, 1.2 V to 5.5 V. The L-suffix parts have an adjustment range of 0.8 V to 1.8 V. The output voltage is set
using a single resistor.
This series includes Auto-Trackв„ў. Auto-Track simplifies power-up and power-down supply voltage sequencing in
a system by enabling modules to track each other, or any other external voltage.
Each model also includes an on/off inhibit, output voltage adjust (trim), and margin up/down controls, and the
ability to start up into an existing prebias. An output voltage sense ensures tight load regulation, and an output
overcurrent and thermal shutdown feature provide for protection against external load faults. …

Preise

Status

	PTH12030WAD	PTH12030WAH	PTH12030WAS	PTH12030WAST	PTH12030WAZ	PTH12030WAZT
Lifecycle Status	Active (Recommended for new designs)	Active (Recommended for new designs)	Active (Recommended for new designs)	Active (Recommended for new designs)	Active (Recommended for new designs)	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes	No	No	No	Yes	Yes

Verpackung

	PTH12030WAD	PTH12030WAH	PTH12030WAS	PTH12030WAST	PTH12030WAZ	PTH12030WAZT
N	1	2	3	4	5	6
Pin	13	13	13	13	13	13
Package Type	EUM	EUM	EUN	EUN	EUN	EUN
Industry STD Term	Through-Hole Module	Through-Hole Module	Surface Mount Module	Surface Mount Module	Surface Mount Module	Surface Mount Module
JEDEC Code	R-PDSS-T	R-PDSS-T	R-PDSS-B	R-PDSS-B	R-PDSS-B	R-PDSS-B
Package QTY	16	16	16	200	16	200
Carrier	TIW TRAY	TIW TRAY	TIW TRAY	SMALL T&R	TIW TRAY	SMALL T&R
Width (mm)	28.45	28.45	28.45	28.45	28.45	28.45
Length (mm)	34.8	34.8	34.8	34.8	34.8	34.8
Thickness (mm)	8.75	8.75	8.75	8.75	8.75	8.75
Pitch (mm)	3.18	3.18	3.175	3.175	3.175	3.175
Max Height (mm)	9	9	9	9	9	9
Mechanical Data	Herunterladen	Herunterladen	Herunterladen	Herunterladen	Herunterladen	Herunterladen

Parameter

Parameters / Models	PTH12030WAD	PTH12030WAH	PTH12030WAS	PTH12030WAST	PTH12030WAZ	PTH12030WAZT
Iout(Max), A	26	26	26	26	26	26
Operating Temperature Range, C	-40 to 85	-40 to 85	-40 to 85	-40 to 85	-40 to 85	-40 to 85
Package Size: mm2:W x L, PKG	13Surface Mount Module: 1055 mm2: 29.45 x 35.81(Surface Mount Module),13Through-Hole Module: 1055 mm2: 29.45 x 35.81(Through-Hole Module)	13Surface Mount Module: 1055 mm2: 29.45 x 35.81(Surface Mount Module),13Through-Hole Module: 1055 mm2: 29.45 x 35.81(Through-Hole Module)	13Surface Mount Module: 1055 mm2: 29.45 x 35.81(Surface Mount Module),13Through-Hole Module: 1055 mm2: 29.45 x 35.81(Through-Hole Module)	13Surface Mount Module: 1055 mm2: 29.45 x 35.81(Surface Mount Module),13Through-Hole Module: 1055 mm2: 29.45 x 35.81(Through-Hole Module)	13Surface Mount Module: 1055 mm2: 29.45 x 35.81(Surface Mount Module),13Through-Hole Module: 1055 mm2: 29.45 x 35.81(Through-Hole Module)	13Surface Mount Module: 1055 mm2: 29.45 x 35.81(Surface Mount Module),13Through-Hole Module: 1055 mm2: 29.45 x 35.81(Through-Hole Module)
Package Type	Open-Frame	Open-Frame	Open-Frame	Open-Frame	Open-Frame	Open-Frame
Regulated Outputs	1	1	1	1	1	1
Soft Start	Fixed	Fixed	Fixed	Fixed	Fixed	Fixed
Special Features	Enable,Output Discharge,Tracking	Enable,Output Discharge,Tracking	Enable,Output Discharge,Tracking	Enable,Output Discharge,Tracking	Enable,Output Discharge,Tracking	Enable,Output Discharge,Tracking
Vin(Max), V	13.8	13.8	13.8	13.8	13.8	13.8
Vin(Min), V	10.2	10.2	10.2	10.2	10.2	10.2
Vout(Max), V	5.5	5.5	5.5	5.5	5.5	5.5
Vout(Min), V	1.2	1.2	1.2	1.2	1.2	1.2

Öko-Plan

	PTH12030WAD	PTH12030WAH	PTH12030WAS	PTH12030WAST	PTH12030WAZ	PTH12030WAZT
RoHS	Not Compliant	Not Compliant	Not Compliant	Not Compliant	Not Compliant	Not Compliant

Anwendungshinweise

Herunterladen
New power modules improve surface-mount manufacturability
PDF, 1.1 Mb, Datei veröffentlicht: Jul 14, 2005
Herunterladen
High-Temperatures Soldering Requirements for Plug-in Power, Surface-Mount Pdts (Rev. A)
PDF, 112 Kb, Revision: A, Datei veröffentlicht: Aug 13, 2009
Herunterladen
Input and Output Capacitor Selection
PDF, 219 Kb, Datei veröffentlicht: Sep 19, 2005

Modellreihe

Serie: PTH12030W (6)

PTH12030WAD PTH12030WAH PTH12030WAS PTH12030WAST PTH12030WAZ PTH12030WAZT

Herstellerklassifikation

Semiconductors> Power Management> Power Modules> Non-Isolated Module> Step-Down (Buck) Module