Datasheet Texas Instruments OPA2690 — Datenblatt
Hersteller | Texas Instruments |
Serie | OPA2690 |
Dual-Breitband-Operationsverstärker mit Spannungsrückkopplung und Deaktivierung
Datenblätter
Dual, Wideband, Voltage-Feedback Operational Amplifier with Disable datasheet
PDF, 1.1 Mb, Revision: G, Datei veröffentlicht: Mar 4, 2010
Auszug aus dem Dokument
Preise
Status
OPA2690I-14D | OPA2690I-14DR | OPA2690I-14DRG4 | OPA2690ID | OPA2690IDG4 | OPA2690IDR | OPA2690IDRG4 | |
---|---|---|---|---|---|---|---|
Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes | Yes | No | No | Yes | No | No |
Verpackung
OPA2690I-14D | OPA2690I-14DR | OPA2690I-14DRG4 | OPA2690ID | OPA2690IDG4 | OPA2690IDR | OPA2690IDRG4 | |
---|---|---|---|---|---|---|---|
N | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
Pin | 14 | 14 | 14 | 8 | 8 | 8 | 8 |
Package Type | D | D | D | D | D | D | D |
Industry STD Term | SOIC | SOIC | SOIC | SOIC | SOIC | SOIC | SOIC |
JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G | R-PDSO-G | R-PDSO-G | R-PDSO-G | R-PDSO-G |
Package QTY | 50 | 2500 | 2500 | 75 | 75 | 2500 | 2500 |
Carrier | TUBE | LARGE T&R | LARGE T&R | TUBE | TUBE | LARGE T&R | LARGE T&R |
Device Marking | OPA2690 | OPA2690 | OPA2690 | OPA | 2690 | OPA | 2690 |
Width (mm) | 3.91 | 3.91 | 3.91 | 3.91 | 3.91 | 3.91 | 3.91 |
Length (mm) | 8.65 | 8.65 | 8.65 | 4.9 | 4.9 | 4.9 | 4.9 |
Thickness (mm) | 1.58 | 1.58 | 1.58 | 1.58 | 1.58 | 1.58 | 1.58 |
Pitch (mm) | 1.27 | 1.27 | 1.27 | 1.27 | 1.27 | 1.27 | 1.27 |
Max Height (mm) | 1.75 | 1.75 | 1.75 | 1.75 | 1.75 | 1.75 | 1.75 |
Mechanical Data | Herunterladen | Herunterladen | Herunterladen | Herunterladen | Herunterladen | Herunterladen | Herunterladen |
Parameter
Parameters / Models | OPA2690I-14D | OPA2690I-14DR | OPA2690I-14DRG4 | OPA2690ID | OPA2690IDG4 | OPA2690IDR | OPA2690IDRG4 |
---|---|---|---|---|---|---|---|
2nd Harmonic, dBc | 68 | 68 | 68 | 68 | 68 | 68 | 68 |
3rd Harmonic, dBc | 70 | 70 | 70 | 70 | 70 | 70 | 70 |
@ MHz | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
Acl, min spec gain, V/V | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Additional Features | Shutdown | Shutdown | Shutdown | Shutdown | Shutdown | Shutdown | Shutdown |
Architecture | Bipolar,Voltage FB | Bipolar,Voltage FB | Bipolar,Voltage FB | Bipolar,Voltage FB | Bipolar,Voltage FB | Bipolar,Voltage FB | Bipolar,Voltage FB |
BW @ Acl, MHz | 500 | 500 | 500 | 500 | 500 | 500 | 500 |
CMRR(Min), dB | 60 | 60 | 60 | 60 | 60 | 60 | 60 |
CMRR(Typ), dB | 65 | 65 | 65 | 65 | 65 | 65 | 65 |
GBW(Typ), MHz | 500 | 500 | 500 | 500 | 500 | 500 | 500 |
Input Bias Current(Max), pA | 11000000 | 11000000 | 11000000 | 11000000 | 11000000 | 11000000 | 11000000 |
Iq per channel(Max), mA | 5.8 | 5.8 | 5.8 | 5.8 | 5.8 | 5.8 | 5.8 |
Iq per channel(Typ), mA | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 |
Number of Channels | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Offset Drift(Typ), uV/C | 12 | 12 | 12 | 12 | 12 | 12 | 12 |
Operating Temperature Range, C | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 |
Output Current(Typ), mA | 190 | 190 | 190 | 190 | 190 | 190 | 190 |
Package Group | SOIC | SOIC | SOIC | SOIC | SOIC | SOIC | SOIC |
Package Size: mm2:W x L, PKG | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) |
Rail-to-Rail | No | No | No | No | No | No | No |
Rating | Catalog | Catalog | Catalog | Catalog | Catalog | Catalog | Catalog |
Slew Rate(Typ), V/us | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 |
Total Supply Voltage(Max), +5V=5, +/-5V=10 | 12 | 12 | 12 | 12 | 12 | 12 | 12 |
Total Supply Voltage(Min), +5V=5, +/-5V=10 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
Vn at 1kHz(Typ), nV/rtHz | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 |
Vn at Flatband(Typ), nV/rtHz | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 |
Vos (Offset Voltage @ 25C)(Max), mV | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 |
Öko-Plan
OPA2690I-14D | OPA2690I-14DR | OPA2690I-14DRG4 | OPA2690ID | OPA2690IDG4 | OPA2690IDR | OPA2690IDRG4 | |
---|---|---|---|---|---|---|---|
RoHS | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
Anwendungshinweise
- Design for a Wideband Differential Transimpedance DAC Output (Rev. A)PDF, 438 Kb, Revision: A, Datei veröffentlicht: Oct 17, 2016
High-speed digital-to-analog converters commonly offer a complementary current output signal. Most output interface implementations use either a resistive load and/or a transformer to convert this current source signal to a voltage. Where a dc-coupled interface is required, a carefully designed differential transimpedance stage can offer an attractive alternative. Design considerations and options - Wireline Data Transmission and ReceptionPDF, 191 Kb, Datei veröffentlicht: Jan 27, 2010
Many types of wires are widely used to transmit data. Specifically, Category 3 and Category 5 (Cat3 and Cat5e, respectively)—also known as unshielded twisted pair or UTP lines—are now recommended for new telephone installations. Coaxial (coax) cables are used to distribute cable television (CATV) signals throughout a home. #12 and #14 American wire gauge (AWG) electric power distribution wire is a - RLC Filter Design for ADC Interface Applications (Rev. A)PDF, 299 Kb, Revision: A, Datei veröffentlicht: May 13, 2015
As high performance Analog-to-Digital Converters (ADCs) continue to improve in their performance, the last stage interface from the final amplifier into the converter inputs becomes a critical element in the system design if the full converter dynamic range is desired. This application note describes the performance and design equations for a simple passive 2nd-order filter used successfully in AD - ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC DriversPDF, 273 Kb, Datei veröffentlicht: Apr 22, 2004
Once an analog-to-digital converter (ADC) and a driver/interface have been selected for a given application, the next step to achieving excellent performance is laying out the printed circuit board (PCB) that will support the application. This application report describes several techniques for optimizing a high-speed, 14-bit performance, differential driver PCB layout using a wideband operation - Measuring Board Parasitics in High-Speed Analog DesignPDF, 134 Kb, Datei veröffentlicht: Jul 7, 2003
Successful circuit designs using high-speed amplifiers can depend upon understanding and identifying parasitic PCB components. Simulating a design while including PCB parasitics can protect against unpleasant production surprises. This application report discusses an easy method for measuring parasitic components in a prototype or final PC board design by using a standard oscilloscope and low freq - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu - Tuning in AmplifiersPDF, 44 Kb, Datei veröffentlicht: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, Datei veröffentlicht: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, Datei veröffentlicht: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Modellreihe
Serie: OPA2690 (7)
Herstellerklassifikation
- Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)