Datasheet Texas Instruments MSP430FR2533 — Datenblatt

HerstellerTexas Instruments
SerieMSP430FR2533
Datasheet Texas Instruments MSP430FR2533

16-MHz-Ultra-Low-Power-Mikrocontroller mit 16-KB-FRAM und CapTIvate-Touch-Technologie

Datenblätter

MSP430FR263x, MSP430FR253x Capacitive Touch Sensing Mixed-Signal Microcontrollers datasheet
PDF, 2.8 Mb, Revision: B, Datei veröffentlicht: Jun 8, 2017
Auszug aus dem Dokument

Preise

Status

MSP430FR2533IDAMSP430FR2533IDARMSP430FR2533IRHBRMSP430FR2533IRHBT
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoYesNoYes

Verpackung

MSP430FR2533IDAMSP430FR2533IDARMSP430FR2533IRHBRMSP430FR2533IRHBT
N1234
Pin32323232
Package TypeDADARHBRHB
Industry STD TermTSSOPTSSOPVQFNVQFN
JEDEC CodeR-PDSO-GR-PDSO-GS-PQFP-NS-PQFP-N
Package QTY4620003000250
Device MarkingFR2533FR2533FR2533FR2533
Width (mm)6.26.255
Length (mm)111155
Thickness (mm)1.151.15.9.9
Pitch (mm).65.65.5.5
Max Height (mm)1.21.211
Mechanical DataHerunterladenHerunterladenHerunterladenHerunterladen
CarrierLARGE T&RLARGE T&R

Parameter

Parameters / ModelsMSP430FR2533IDA
MSP430FR2533IDA
MSP430FR2533IDAR
MSP430FR2533IDAR
MSP430FR2533IRHBR
MSP430FR2533IRHBR
MSP430FR2533IRHBT
MSP430FR2533IRHBT
ADCADC10 - 8chADC10 - 8chADC10 - 8chADC10 - 8ch
AESN/AN/AN/AN/A
Active Power, uA/MHz126126126126
Additional FeaturesReal-Time Clock,Watchdog,Temp Sensor,Brown Out ResetReal-Time Clock,Watchdog,Temp Sensor,Brown Out ResetReal-Time Clock,Watchdog,Temp Sensor,Brown Out ResetReal-Time Clock,Watchdog,Temp Sensor,Brown Out Reset
BSLI2C,UARTI2C,UARTI2C,UARTI2C,UART
CPUMSP430MSP430MSP430MSP430
FeaturedNANANANA
Frequency, MHz16161616
GPIO Pins19191919
I2C1111
Max VCC3.63.63.63.6
Min VCC1.81.81.81.8
Multiplier32x3232x3232x3232x32
Non-volatile Memory, KB16161616
Operating Temperature Range, C-40 to 85-40 to 85-40 to 85-40 to 85
Package GroupTSSOPTSSOPVQFNVQFN
Package Size: mm2:W x L, PKG32TSSOP: 89 mm2: 8.1 x 11(TSSOP)32TSSOP: 89 mm2: 8.1 x 11(TSSOP)32VQFN: 25 mm2: 5 x 5(VQFN)32VQFN: 25 mm2: 5 x 5(VQFN)
RAM, KB2222
RatingCatalogCatalogCatalogCatalog
SPI2222
Special I/OCapTIvate Touch I/OCapTIvate Touch I/OCapTIvate Touch I/OCapTIvate Touch I/O
Standby Power, LPM3-uA1.51.51.51.5
Timers - 16-bit4444
UART2222
Wakeup Time, us10101010

Öko-Plan

MSP430FR2533IDAMSP430FR2533IDARMSP430FR2533IRHBRMSP430FR2533IRHBT
RoHSCompliantCompliantCompliantCompliant

Anwendungshinweise

  • VLO Calibration on the MSP430FR4xx and MSP430FR2xx Family (Rev. A)
    PDF, 78 Kb, Revision: A, Datei veröffentlicht: Feb 19, 2016
    MSP430FR4xx and MSP430FR2xx (FR4xx/FR2xx) family microcontrollers (MCUs) provide various clock sources, including some high-speed high-accuracy clocks and some low-power low-system-cost clocks. Users can select the best balance of performance, power consumption, and system cost. The on-chip very low-frequency oscillator (VLO) is a clock source with 10-kHz typical frequency included in FR4xx/FR2xx
  • MSP430 FRAM Technology – How To and Best Practices
    PDF, 326 Kb, Datei veröffentlicht: Jun 23, 2014
    FRAM is a non-volatile memory technology that behaves similar to SRAM while enabling a whole host of new applications, but also changing the way firmware should be designed. This application report outlines the how to and best practices of using FRAM technology in MSP430 from an embedded software development perspective. It discusses how to implement a memory layout according to application-specif
  • MSP430 FRAM Quality and Reliability (Rev. A)
    PDF, 295 Kb, Revision: A, Datei veröffentlicht: May 1, 2014
    FRAM is a nonvolatile embedded memory technology and is known for its ability to be ultra-low power while being the most flexible and easy-to-use universal memory solution available today. This application report is intended to give new FRAM users and those migrating from flash-based applications knowledge on how FRAM meets key quality and reliability requirements such as data retention and endura
  • Migrating From MSP430 F2xx and G2xx Families to MSP430 FR4xx and FR2xx Family (Rev. E)
    PDF, 237 Kb, Revision: E, Datei veröffentlicht: May 4, 2018
    This application report helps to ease the migration from MSP430F2xx flash-based MCUs to the MSP430FR4xx and MSP430FR2xx family of FRAM-based MCUs. It discusses programming system hardware core architecture and peripheral considerations. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the MSP430
  • General Oversampling of MSP ADCs for Higher Resolution (Rev. A)
    PDF, 551 Kb, Revision: A, Datei veröffentlicht: Apr 1, 2016
    Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl

Modellreihe

Herstellerklassifikation

  • Semiconductors> Sensing Products> Capacitive Sensing> Capacitive Touch MCUs