Datasheet Texas Instruments LMZ22008TZ/NOPB — Datenblatt

HerstellerTexas Instruments
SerieLMZ22008
ArtikelnummerLMZ22008TZ/NOPB
Datasheet Texas Instruments LMZ22008TZ/NOPB

8A SIMPLE SWITCHER® Power Module mit maximal 20 V Eingangsspannung und Stromverteilung 11-PFM -40 bis 85

Datenblätter

LMZ22008 8-A SIMPLE SWITCHERВ® Power Module With 20-V Maximum Input Voltage and Current Sharing datasheet
PDF, 1.5 Mb, Revision: H, Datei veröffentlicht: Aug 31, 2015
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin11
Package TypeNDY
Industry STD TermTO-PMOD
JEDEC CodeS-MSFM-P
Package QTY32
CarrierTUBE
Device MarkingLMZ22008
Width (mm)15
Length (mm)15
Thickness (mm)5.9
Pitch (mm)1.27
Max Height (mm)6.13
Mechanical DataHerunterladen

Parameter

Iout(Max)8 A
Iq(Typ)3 mA
Operating Temperature Range-40 to 85 C
Package Size: mm2:W x LSee datasheet (PFM) PKG
Package TypeLeaded
Regulated Outputs1
Soft StartAdjustable
Special FeaturesCurrent Sharing,EMI Tested,Enable,Frequency Synchronization,Tracking
Switching Frequency(Max)600 kHz
Switching Frequency(Min)350 kHz
Switching Frequency(Typ)359 kHz
Vin(Max)20 V
Vin(Min)6 V
Vout(Max)6 V
Vout(Min)0.8 V

Öko-Plan

RoHSNot Compliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: LMZ22008EVAL
    20 Volt Simple SwitcherВ® Module 8A Current Sharing Evaluation Board
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Understanding and Applying Current-Mode Control Theory
    PDF, 409 Kb, Datei veröffentlicht: Aug 19, 2007
  • AN-643 EMI/RFI Board Design (Rev. B)
    PDF, 742 Kb, Revision: B, Datei veröffentlicht: May 3, 2004
    Application Note 643 EMI/RFI Board Design
  • Design Summary LMZ1xxx and LMZ2xxx Power Module Family (Rev. B)
    PDF, 996 Kb, Revision: B, Datei veröffentlicht: Jan 20, 2016
  • AN-2026 Effect of PCB Design on Thermal Performance of SIMPLE SWITCHER Modules (Rev. A)
    PDF, 455 Kb, Revision: A, Datei veröffentlicht: Apr 23, 2013
    This application report focuses on the low current modules that come in a 7 lead, 10.16 x 4.57 x 9.81 mmpackage.
  • AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)
    PDF, 2.7 Mb, Revision: A, Datei veröffentlicht: Apr 23, 2013
    This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
  • AN-2078 PCB Layout for Texas Instruments SIMPLE SWITCHER Power Modules (Rev. A)
    PDF, 1.1 Mb, Revision: A, Datei veröffentlicht: Apr 23, 2013
    This application report discusses the best PCB layout methods, practices and techniques to maximize themodule’s performance.
  • AN-2052 Texas Instruments SIMPLE SWITCHER Power Modules and EMI (Rev. C)
    PDF, 99 Kb, Revision: C, Datei veröffentlicht: Apr 23, 2013
    While the principles discussed in this application report apply more broadly to power design, we will focuson DC to DC convertor design given its broad application. It affects virtually every hardware engineer whoat some point has to design a power convertor. In this application report we will consider two commontrade-offs related to low EMI design; thermal performance and EMI and also solut
  • AN-2027 Inverting Application for the LMZ14203 SIMPLE SWITCHER Power Module (Rev. A)
    PDF, 244 Kb, Revision: A, Datei veröffentlicht: May 6, 2013
    This application report illustrates how to apply the LMZ14203 integrated buck module into the buck-boost configuration such that a positive input voltage can be used to create a regulated negative output voltage.

Modellreihe

Serie: LMZ22008 (2)

Herstellerklassifikation

  • Semiconductors > Power Management > Power Modules > Non-Isolated Module > Step-Down (Buck) Module