Datasheet Texas Instruments LMK04805 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LMK04805 |
Rauscharmer Takt-Jitter-Reiniger mit zwei kaskadierten PLLs und integriertem 2,2-GHz-VCO
Datenblätter
LMK0480x Low-Noise Clock Jitter Cleaner with Dual Loop PLLs datasheet
PDF, 2.1 Mb, Revision: K, Datei veröffentlicht: Dec 24, 2014
Auszug aus dem Dokument
Preise
Status
| LMK04805BISQ/NOPB | LMK04805BISQE/NOPB | LMK04805BISQX/NOPB | |
|---|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | Yes | No |
Verpackung
| LMK04805BISQ/NOPB | LMK04805BISQE/NOPB | LMK04805BISQX/NOPB | |
|---|---|---|---|
| N | 1 | 2 | 3 |
| Pin | 64 | 64 | 64 |
| Package Type | NKD | NKD | NKD |
| Industry STD Term | WQFN | WQFN | WQFN |
| JEDEC Code | S-PQFP-N | S-PQFP-N | S-PQFP-N |
| Package QTY | 1000 | 250 | 2000 |
| Carrier | LARGE T&R | SMALL T&R | LARGE T&R |
| Device Marking | K04805BISQ | K04805BISQ | K04805BISQ |
| Width (mm) | 9 | 9 | 9 |
| Length (mm) | 9 | 9 | 9 |
| Pitch (mm) | .5 | .5 | .5 |
| Max Height (mm) | .8 | .8 | .8 |
| Mechanical Data | Herunterladen | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | LMK04805BISQ/NOPB | LMK04805BISQE/NOPB | LMK04805BISQX/NOPB |
|---|---|---|---|
| Number of Inputs | 2 | 2 | 2 |
| Number of Outputs | 14 | 14 | 14 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 | -40 to 85 |
| Output Frequency(Max), MHz | 2370 | 2370 | 2370 |
| Output Frequency(Min), MHz | 0.22 | 0.22 | 0.22 |
| Output Level | LVCMOS,LVDS,LVPECL | LVCMOS,LVDS,LVPECL | LVCMOS,LVDS,LVPECL |
| Package Group | WQFN | WQFN | WQFN |
| Package Size: mm2:W x L, PKG | 64WQFN: 81 mm2: 9 x 9(WQFN) | 64WQFN: 81 mm2: 9 x 9(WQFN) | 64WQFN: 81 mm2: 9 x 9(WQFN) |
| RMS Jitter | 0.111 | 0.111 | 0.111 |
| Rating | Catalog | Catalog | Catalog |
| Special Features | Holdover mode,Int. xtal oscillator,Manual/auto switch,SPI,uWire | Holdover mode,Int. xtal oscillator,Manual/auto switch,SPI,uWire | Holdover mode,Int. xtal oscillator,Manual/auto switch,SPI,uWire |
| Supply Voltage(Max), V | 3.45 | 3.45 | 3.45 |
| Supply Voltage(Min), V | 3.15 | 3.15 | 3.15 |
| VCO Frequency(Max), MHz | 2370 | 2370 | 2370 |
| VCO Frequency(Min), MHz | 2148 | 2148 | 2148 |
Öko-Plan
| LMK04805BISQ/NOPB | LMK04805BISQE/NOPB | LMK04805BISQX/NOPB | |
|---|---|---|---|
| RoHS | Compliant | Compliant | Compliant |
Anwendungshinweise
- Using the LMK0480x/LMK04906 for Hitless Switching and HoldoverPDF, 3.8 Mb, Datei veröffentlicht: Jul 12, 2013
This application report discusses some of the key performance results when using LMK0480x/LMK04906to implement hitless switching between reference clocks. Hitless Switching is required in certainapplications such as SONET/SDH/line port cards and routers/switchers in order to minimize thepropagation of phase transients to the clock outputs during reference clock switching. On loss of all vali
Modellreihe
Serie: LMK04805 (3)
Herstellerklassifikation
- Semiconductors> Clock and Timing> Clock Jitter Cleaners> Dual / Cascaded PLL