Datasheet Texas Instruments LMH6642Q-Q1 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LMH6642Q-Q1 |
Geringe Leistung 130 MHz 75 mA Rail-to-Rail-Ausgangsverstärker
Datenblätter
LMH6642Q/LMH6643Q Low Power, 130 MHz, 75 mA Rail-to-Rail Output Amplifiers datasheet
PDF, 1.5 Mb, Revision: C, Datei veröffentlicht: Sep 10, 2014
Auszug aus dem Dokument
Preise
Status
| LMH6642QMF/NOPB | LMH6642QMFX/NOPB | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | Yes |
Verpackung
| LMH6642QMF/NOPB | LMH6642QMFX/NOPB | |
|---|---|---|
| N | 1 | 2 |
| Pin | 5 | 5 |
| Package Type | DBV | DBV |
| Industry STD Term | SOT-23 | SOT-23 |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 1000 | 3000 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | A64Q | A64Q |
| Width (mm) | 1.6 | 1.6 |
| Length (mm) | 2.9 | 2.9 |
| Thickness (mm) | 1.2 | 1.2 |
| Pitch (mm) | .95 | .95 |
| Max Height (mm) | 1.45 | 1.45 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | LMH6642QMF/NOPB | LMH6642QMFX/NOPB |
|---|---|---|
| 2nd Harmonic, dBc | 80 | 80 |
| 3rd Harmonic, dBc | 65 | 65 |
| @ MHz | 1 | 1 |
| Acl, min spec gain, V/V | 1 | 1 |
| Additional Features | N/A | N/A |
| Architecture | Bipolar,Voltage FB | Bipolar,Voltage FB |
| BW @ Acl, MHz | 130 | 130 |
| CMRR(Min), dB | 72 | 72 |
| CMRR(Typ), dB | 95 | 95 |
| GBW(Typ), MHz | 130 | 130 |
| Input Bias Current(Max), pA | 2600000 | 2600000 |
| Iq per channel(Max), mA | 4 | 4 |
| Iq per channel(Typ), mA | 2.7 | 2.7 |
| Number of Channels | 1 | 1 |
| Offset Drift(Typ), uV/C | 5 | 5 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 |
| Output Current(Typ), mA | 115 | 115 |
| Package Group | SOT-23 | SOT-23 |
| Package Size: mm2:W x L, PKG | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) |
| Rail-to-Rail | In to V-,Out | In to V-,Out |
| Rating | Automotive | Automotive |
| Slew Rate(Typ), V/us | 135 | 135 |
| Total Supply Voltage(Max), +5V=5, +/-5V=10 | 10 | 10 |
| Total Supply Voltage(Min), +5V=5, +/-5V=10 | 2.7 | 2.7 |
| Vn at 1kHz(Typ), nV/rtHz | 17 | 17 |
| Vn at Flatband(Typ), nV/rtHz | 17 | 17 |
| Vos (Offset Voltage @ 25C)(Max), mV | 5 | 5 |
Öko-Plan
| LMH6642QMF/NOPB | LMH6642QMFX/NOPB | |
|---|---|---|
| RoHS | Compliant | Compliant |
Anwendungshinweise
- AN-1240 Video Transmission Over Twisted Pair Wire (Rev. C)PDF, 102 Kb, Revision: C, Datei veröffentlicht: May 1, 2013
The circuits in Figure 1 and Figure 2 transmit NTSC video signals over twisted pair wire. They weredesigned and tested for transmitting video on inexpensive CAT-3 twisted pair wire. Even when transmittingon 1000 feet of wire, good quality color video was displayed on a monitor with an NTSC input. Both thetransmit and receive circuits use the LMH6643 dual op-amp that has the proper bandwidth - AN-1244 Photo-Diode Current-to-Voltage Converters (Rev. B)PDF, 132 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
Converting the small output current of a photo-diode transducer to a fast responding voltage is oftenchallenging. This application report provides some ways to use high-speed current feedback and voltagefeedback op amps to do the job.
Modellreihe
Serie: LMH6642Q-Q1 (2)
Herstellerklassifikation
- Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)