Datasheet Texas Instruments LM3414 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LM3414 |
60W Common Anode-fähiger Konstantstrom-Buck-LED-Treiber erfordert keine ext. Stromerfassung Res
Datenblätter
LM3414/HV 1-A, 60-W Common Anode-Capable Constant Current Buck LED Driver Requires No External Current Sensing Resistor datasheet
PDF, 1.7 Mb, Revision: F, Datei veröffentlicht: Dec 3, 2015
Auszug aus dem Dokument
Preise
Status
| LM3414MR/NOPB | LM3414MRX/NOPB | LM3414SD/NOPB | LM3414SDX/NOPB | |
|---|---|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | No | Yes | Yes |
Verpackung
| LM3414MR/NOPB | LM3414MRX/NOPB | LM3414SD/NOPB | LM3414SDX/NOPB | |
|---|---|---|---|---|
| N | 1 | 2 | 3 | 4 |
| Pin | 8 | 8 | 8 | 8 |
| Package Type | DDA | DDA | NGQ | NGQ |
| Industry STD Term | HSOIC | HSOIC | WSON | WSON |
| JEDEC Code | R-PDSO-G | R-PDSO-G | S-PDSO-N | S-PDSO-N |
| Package QTY | 95 | 2500 | 1000 | 4500 |
| Carrier | TUBE | LARGE T&R | LARGE T&R | LARGE T&R |
| Device Marking | L3414 | MR | L248B | L248B |
| Width (mm) | 3.9 | 3.9 | 3 | 3 |
| Length (mm) | 4.89 | 4.89 | 3 | 3 |
| Thickness (mm) | 1.48 | 1.48 | .8 | .8 |
| Pitch (mm) | 1.27 | 1.27 | .5 | .5 |
| Max Height (mm) | 1.7 | 1.7 | .8 | .8 |
| Mechanical Data | Herunterladen | Herunterladen | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | LM3414MR/NOPB | LM3414MRX/NOPB | LM3414SD/NOPB | LM3414SDX/NOPB |
|---|---|---|---|---|
| Dimming Method | Analog,PWM | Analog,PWM | Analog,PWM | Analog,PWM |
| Input Voltage, Type | DC/DC | DC/DC | DC/DC | DC/DC |
| Iout(Max), A | 1 | 1 | 1 | 1 |
| Iq(Typ), mA | 3.2 | 3.2 | 3.2 | 3.2 |
| Operating Temperature Range, C | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 |
| Package Group | SO PowerPAD | SO PowerPAD | WSON | WSON |
| Package Size: mm2:W x L, PKG | 8SO PowerPAD: 29 mm2: 6 x 4.9(SO PowerPAD) | 8SO PowerPAD: 29 mm2: 6 x 4.9(SO PowerPAD) | See datasheet (WSON) | See datasheet (WSON) |
| Power Factor Correction, Min | N/A | N/A | N/A | N/A |
| Rating | Catalog | Catalog | Catalog | Catalog |
| Regulated Outputs | 1 | 1 | 1 | 1 |
| Special Features | Adjustable Switch Frequency,Enable/Shutdown,Integrated Switch,Thermal Shutdown | Adjustable Switch Frequency,Enable/Shutdown,Integrated Switch,Thermal Shutdown | Adjustable Switch Frequency,Enable/Shutdown,Integrated Switch,Thermal Shutdown | Adjustable Switch Frequency,Enable/Shutdown,Integrated Switch,Thermal Shutdown |
| Switching Frequency(Max), kHz | 1000 | 1000 | 1000 | 1000 |
| Switching Frequency(Min), kHz | 250 | 250 | 250 | 250 |
| Topology | Buck | Buck | Buck | Buck |
| Type | Converter,Inductive | Converter,Inductive | Converter,Inductive | Converter,Inductive |
| Vin(Max), V | 42 | 42 | 42 | 42 |
| Vin(Min), V | 4.5 | 4.5 | 4.5 | 4.5 |
| Vout(Max), V | 42 | 42 | 42 | 42 |
| Vout(Min), V | 0.2 | 0.2 | 0.2 | 0.2 |
| Vref, V | 0.2 | 0.2 | 0.2 | 0.2 |
Öko-Plan
| LM3414MR/NOPB | LM3414MRX/NOPB | LM3414SD/NOPB | LM3414SDX/NOPB | |
|---|---|---|---|---|
| RoHS | Compliant | Compliant | Compliant | Compliant |
Anwendungshinweise
- AN-1656 Design Challenges of Switching LED Drivers (Rev. A)PDF, 171 Kb, Revision: A, Datei veröffentlicht: May 3, 2013
Using a switching regulator as an LED driver requires the designer to convert a voltage regulator into acurrent regulator. Beyond the challenge of changing the feedback system to control current, the LEDsthemselves present a load characteristic that is much different than the digital devices and other loads thatrequire constant voltage. The LED WEBENCHВ® online design environment predicts and
Modellreihe
Serie: LM3414 (4)
Herstellerklassifikation
- Semiconductors> Power Management> LED Driver> LED Lighting - Illumination