Datasheet Texas Instruments LM324 — Datenblatt

HerstellerTexas Instruments
SerieLM324
Datasheet Texas Instruments LM324

Vierfacher Operationsverstärker

Datenblätter

Datasheet LM124, LM124A, LM124M, LM224, LM224A, LM224K, LM224KA, LM2902, LM2902K, LM2902KAV, LM2902KV, LM2902V, LM324, LM324A, LM324K, LM324KA
PDF, 1.8 Mb, Revision: W, Datei veröffentlicht: Mar 30, 2014, Seiten: 42
Quadruple Operational Amplifiers
Auszug aus dem Dokument

Preise

Status

LM324DLM324DE4LM324DG4LM324DRLM324DRE4LM324DRG3LM324DRG4LM324NLM324NE3LM324NE4LM324NSRLM324NSRE4LM324NSRG4LM324PWLM324PWE4LM324PWG4LM324PWLELM324PWRLM324PWRE4LM324PWRG3LM324PWRG4LM324Y
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Obsolete (Manufacturer has discontinued the production of the device)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Obsolete (Manufacturer has discontinued the production of the device)
Manufacture's Sample AvailabilityYesYesYesNoNoYesNoNoYesNoNoNoNoNoNoNoNoNoNoYesNoNo

Verpackung

LM324DLM324DE4LM324DG4LM324DRLM324DRE4LM324DRG3LM324DRG4LM324NLM324NE3LM324NE4LM324NSRLM324NSRE4LM324NSRG4LM324PWLM324PWE4LM324PWG4LM324PWLELM324PWRLM324PWRE4LM324PWRG3LM324PWRG4LM324Y
N12345678910111213141516171819202122
Pin141414141414141414141414141414141414141414
Package TypeDDDDDDDNNNNSNSNSPWPWPWPWPWPWPWPWY
Industry STD TermSOICSOICSOICSOICSOICSOICSOICPDIPPDIPPDIPSOPSOPSOPTSSOPTSSOPTSSOPTSSOPTSSOPTSSOPTSSOPTSSOP
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDIP-TR-PDIP-TR-PDIP-TR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY50505025002500250025002525252000200020009090902000200020002000
CarrierTUBETUBETUBELARGE T&RLARGE T&RLARGE T&RLARGE T&RTUBETUBETUBELARGE T&RLARGE T&RLARGE T&RTUBETUBETUBELARGE T&RLARGE T&RLARGE T&RLARGE T&R
Device MarkingLM324LM324LM324LM324LM324LM324LM324LM324NLM324NLM324NLM324LM324LM324L324L324L324L324L324L324L324
Width (mm)3.913.913.913.913.913.913.916.356.356.355.35.35.34.44.44.44.44.44.44.44.4
Length (mm)8.658.658.658.658.658.658.6519.319.319.310.310.310.355555555
Thickness (mm)1.581.581.581.581.581.581.583.93.93.91.951.951.9511111111
Pitch (mm)1.271.271.271.271.271.271.272.542.542.541.271.271.27.65.65.65.65.65.65.65.65
Max Height (mm)1.751.751.751.751.751.751.755.085.085.082221.21.21.21.21.21.21.21.2
Mechanical DataHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladen

Parameter

Parameters / ModelsLM324D
LM324D
LM324DE4
LM324DE4
LM324DG4
LM324DG4
LM324DR
LM324DR
LM324DRE4
LM324DRE4
LM324DRG3
LM324DRG3
LM324DRG4
LM324DRG4
LM324N
LM324N
LM324NE3
LM324NE3
LM324NE4
LM324NE4
LM324NSR
LM324NSR
LM324NSRE4
LM324NSRE4
LM324NSRG4
LM324NSRG4
LM324PW
LM324PW
LM324PWE4
LM324PWE4
LM324PWG4
LM324PWG4
LM324PWLE
LM324PWLE
LM324PWR
LM324PWR
LM324PWRE4
LM324PWRE4
LM324PWRG3
LM324PWRG3
LM324PWRG4
LM324PWRG4
LM324Y
LM324Y
Additional FeaturesN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A
Approx. Price (US$)0.07 | 1ku0.07 | 1ku
ArchitectureBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolar
CMRR(Min), dB6565656565656565656565656565656565656565
CMRR(Min)(dB)6565
CMRR(Typ), dB8080808080808080808080808080808080808080
CMRR(Typ)(dB)8080
GBW(Typ), MHz1.21.21.21.21.21.21.21.21.21.21.21.21.21.21.21.21.21.21.21.2
GBW(Typ)(MHz)1.21.2
Input Bias Current(Max), pA250000250000250000250000250000250000250000250000250000250000250000250000250000250000250000250000250000250000250000250000
Input Bias Current(Max)(pA)250000250000
Iq per channel(Max), mA0.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.3
Iq per channel(Max)(mA)0.30.3
Iq per channel(Typ), mA0.1750.1750.1750.1750.1750.1750.1750.1750.1750.1750.1750.1750.1750.1750.1750.1750.1750.1750.1750.175
Iq per channel(Typ)(mA)0.1750.175
Number of Channels44444444444444444444
Number of Channels(#)44
Offset Drift(Typ), uV/C77777777777777777777
Offset Drift(Typ)(uV/C)77
Operating Temperature Range, C0 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 70
Operating Temperature Range(C)-40 to 85
0 to 70
-40 to 85
0 to 70
Output Current(Typ), mA4040404040404040404040404040404040404040
Output Current(Typ)(mA)4040
Package GroupSOICSOICSOICSOICSOICSOICSOICPDIPPDIPPDIPSOSOSOTSSOPTSSOPTSSOPTSSOPTSSOPTSSOPTSSOPTSSOPPDIP
SO
SOIC
TSSOP
WAFERSALE
Package Size: mm2:W x L, PKG14SOIC: 52 mm2: 6 x 8.65(SOIC)14SOIC: 52 mm2: 6 x 8.65(SOIC)14SOIC: 52 mm2: 6 x 8.65(SOIC)14SOIC: 52 mm2: 6 x 8.65(SOIC)14SOIC: 52 mm2: 6 x 8.65(SOIC)14SOIC: 52 mm2: 6 x 8.65(SOIC)14SOIC: 52 mm2: 6 x 8.65(SOIC)See datasheet (PDIP)See datasheet (PDIP)See datasheet (PDIP)14SO: 80 mm2: 7.8 x 10.2(SO)14SO: 80 mm2: 7.8 x 10.2(SO)14SO: 80 mm2: 7.8 x 10.2(SO)14TSSOP: 32 mm2: 6.4 x 5(TSSOP)14TSSOP: 32 mm2: 6.4 x 5(TSSOP)14TSSOP: 32 mm2: 6.4 x 5(TSSOP)14TSSOP: 32 mm2: 6.4 x 5(TSSOP)14TSSOP: 32 mm2: 6.4 x 5(TSSOP)14TSSOP: 32 mm2: 6.4 x 5(TSSOP)14TSSOP: 32 mm2: 6.4 x 5(TSSOP)
Package Size: mm2:W x L (PKG)See datasheet (PDIP)See datasheet (PDIP)
Rail-to-RailIn to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-
RatingCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalog
Slew Rate(Typ), V/us0.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.5
Slew Rate(Typ)(V/us)0.50.5
Total Supply Voltage(Max), +5V=5, +/-5V=103232323232323232323232323232323232323232
Total Supply Voltage(Max)(+5V=5, +/-5V=10)3232
Total Supply Voltage(Min), +5V=5, +/-5V=1033333333333333333333
Total Supply Voltage(Min)(+5V=5, +/-5V=10)33
Vn at 1kHz(Typ), nV/rtHz3535353535353535353535353535353535353535
Vn at 1kHz(Typ)(nV/rtHz)3535
Vos (Offset Voltage @ 25C)(Max), mV77777777777777777777
Vos (Offset Voltage @ 25C)(Max)(mV)77

Öko-Plan

LM324DLM324DE4LM324DG4LM324DRLM324DRE4LM324DRG3LM324DRG4LM324NLM324NE3LM324NE4LM324NSRLM324NSRE4LM324NSRG4LM324PWLM324PWE4LM324PWG4LM324PWLELM324PWRLM324PWRE4LM324PWRG3LM324PWRG4LM324Y
RoHSCompliantCompliantCompliantCompliantCompliantCompliantCompliantCompliantCompliantCompliantCompliantCompliantCompliantCompliantCompliantCompliantNot CompliantCompliantCompliantCompliantCompliantNot Compliant
Pb FreeYesYesYesNoNo

Anwendungshinweise

  • AN-260 A 20-Bit (1 ppm) Linear Slope-Integrating A/D Converter (Rev. B)
    PDF, 502 Kb, Revision: B, Datei veröffentlicht: May 5, 2013
    This application report discusses how combining an “inferior”, 20 year old A/D conversion technique with amicroprocessor, a developmental A/D converter achieves 1 part-per-million (20-bit) linearity.
  • True RMS Detector
    PDF, 88 Kb, Datei veröffentlicht: Oct 1, 2002
  • AN-29 IC Op Amp Beats FETs on Input Current (Rev. B)
    PDF, 965 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
    This application note describes a monolithic operational amplifier which has input error currents in theorder of 100 pA over a в€’55В°C to 125В°C temperature range. Instead of FETs, the circuit used bipolartransistors with current gains of 5000 so that offset voltage and drift are not degraded. A powerconsumption of 1 mW at low voltage is also featured.A number of novel circuits that make use
  • AN-24 A Simplified Test Set for Op Amp Characterization
    PDF, 1.2 Mb, Datei veröffentlicht: May 10, 2004
    Application Note 24 A Simplified Test Set for Op Amp Characterization
  • AN-20 An Applications Guide for Op Amps (Rev. C)
    PDF, 727 Kb, Revision: C, Datei veröffentlicht: May 1, 2013
    This application note is a guide for Op Amps. The circuits discussed herein are illustrative of the versatilityof the integrated operational amplifier and provide a guide to a number of useful applications. Thecautions noted in each section will show the more common pitfalls encountered in amplifier usage.
  • AN-4 Monolithic Op Amp—The Universal Linear Component (Rev. B)
    PDF, 579 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
    Operational amplifiers are undoubtedly the easiest and best way of performing a wide range of linearfunctions from simple amplification to complex analog computation. The cost of monolithic amplifiers isnow less than $2.00, in large quantities, which makes it attractive to design them into circuits where theywould not otherwise be considered. Yet low cost is not the only attraction of monoli
  • AN-32 FET Circuit Applications
    PDF, 254 Kb, Datei veröffentlicht: May 10, 2004
  • AN-31 Op Amp Circuit Collection (Rev. B)
    PDF, 2.3 Mb, Revision: B, Datei veröffentlicht: May 1, 2013
    This application report provides basic circuits of the Texas Instruments op amp collection.
  • AN-30 Log Converters (Rev. B)
    PDF, 370 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
    One of the most predictable non-linear elements commonly available is the bipolar transistor. Therelationship between collector current and emitter base voltage is precisely logarithmic from currentsbelow one picoamp to currents above one milliamp. Using a matched pair of transistors and integratedcircuit operational amplifiers it is relatively easy to construct a linear to logarithmic conv
  • AN-241 Working with High Impedance Op Amps
    PDF, 169 Kb, Datei veröffentlicht: May 3, 2004
    Application Note 241 Working with High Impedance Op Amps
  • AB-24 Bench Testing LM3900 and LM359 Input Parameters
    PDF, 142 Kb, Datei veröffentlicht: May 10, 2004
    Application Brief 24 Bench Testing LM3900 and LM359 Input Parameters
  • AN-278 Designing with a New Super Fast Dual Norton Amplifier (Rev. B)
    PDF, 867 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
    This application note provides new design ideas and discusses the positive impact of designing with theDual Norton amplifier.
  • AN-446 A 150W IC Op Amp Simplifies Design of Power Circuits
    PDF, 782 Kb, Datei veröffentlicht: May 10, 2004
    Application Note 446 A 150W IC Op Amp Simplifies Design of Power Circuits
  • Building an Op Amp With Bipolar Transistors, A Historical Application Note (Rev. A)
    PDF, 1.2 Mb, Revision: A, Datei veröffentlicht: Sep 19, 2016
    It is well known that the voltage noise of an operational amplifier can be decreased by increasing the emitter currentof the input stage. The signal-to-noise ratio will be improved by the increase of bias, until the base current noise begins to dominate.
  • General Purpose Power Supply
    PDF, 94 Kb, Datei veröffentlicht: Oct 3, 2002
  • AN-A The Monolithic Operational Amplifier: A Tutorial Study
    PDF, 379 Kb, Datei veröffentlicht: May 11, 2004
  • Precise Tri-Wave Generation
    PDF, 80 Kb, Datei veröffentlicht: Oct 2, 2002
  • AN-46 The Phase Locked Loop IC as a Communication System Building Block
    PDF, 314 Kb, Datei veröffentlicht: May 14, 2004
  • Low Drift Amplifiers
    PDF, 71 Kb, Datei veröffentlicht: Oct 2, 2002
  • AN-79 IC Preamplifier Challenges Choppers on Drift (Rev. B)
    PDF, 940 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
    Since the introduction of monolithic IC amplifiers there has been a continual improvement in DC accuracy.Bias currents have been decreased by 5 orders of magnitude over the past 5 years. Low offset voltagedrift is also necessary in a high accuracy circuits. This is evidenced by the popularity of low drift amplifiertypes as well as the requests for selected low-drift op amps. However until n
  • Predicting Op Amp Slew Rate Limited Response
    PDF, 139 Kb, Datei veröffentlicht: Oct 7, 2002
  • Audio Applications of Linear Integrated Circuits
    PDF, 272 Kb, Datei veröffentlicht: May 2, 2004
  • AN-262 Applying Dual and Quad FET Op Amps (Rev. B)
    PDF, 1.1 Mb, Revision: B, Datei veröffentlicht: May 6, 2013
    The availability of dual and quad packaged FET op amps offers the designer all the traditional capabilitiesof FET op amps including low bias current and speed and some additional advantages. The cost-peramplifieris lower because of reduced package costs. This means that more amplifiers are available toimplement a function at a given cost making design easier. At the same time the availab
  • Applying a New Precision Op Amp
    PDF, 421 Kb, Datei veröffentlicht: Oct 4, 2004
  • AN-263 Sine Wave Generation Techniques (Rev. C)
    PDF, 747 Kb, Revision: C, Datei veröffentlicht: Apr 22, 2013
    This application note describes the sine wave generation techniques to control frequency amplitude anddistortion levels.
  • Super Matched Bipolar Transistor Pair Sets New Standards for Drift and Noise (Rev. B)
    PDF, 966 Kb, Revision: B, Datei veröffentlicht: May 5, 2013
    This application report discusses how a super matched bipolar transistor pair sets new standards for driftand noise.
  • AN-480 A 40 MHz Programmable Video Op Amp
    PDF, 218 Kb, Datei veröffentlicht: May 11, 2004
  • AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B)
    PDF, 262 Kb, Revision: B, Datei veröffentlicht: May 6, 2013
    Of all common environmental parameters humidity is perhaps the least understood and most difficult tomeasure. The most common electronic humidity detection methods albeit highly accurate are not obviousand tend to be expensive and complex (See Box). Accurate humidity measurement is vital to a number ofdiverse areas including food processing paper and lumber production pollution monitor
  • Get More Power Out of Dual or Quad Op-Amps
    PDF, 91 Kb, Datei veröffentlicht: Oct 2, 2002
  • Get Fast Stable Response From Improved Unity-Gain Followers
    PDF, 107 Kb, Datei veröffentlicht: Oct 2, 2002
  • AN-666 DTMF Generation with 3.58 MHz Crystal
    PDF, 798 Kb, Datei veröffentlicht: May 14, 2004
  • Mounting of Surface Mount Components (Rev. B)
    PDF, 5.8 Mb, Revision: B, Datei veröffentlicht: Apr 23, 2013
    Over the past few years, electronic products, and especially those which fall within the category ofConsumer Electronics, have been significantly reduced in physical size and weight. This documentprovides information about the techniques used to mount CSP size components.
  • CMOS ADC Interfaces Easily with many Microprocessors (Rev. B)
    PDF, 183 Kb, Revision: B, Datei veröffentlicht: Apr 30, 2013
    To help meet the rising demand for easier interfacing between analog-to-digital converters and microprocessors, the complementary MOS, 8-bit ADC0801-05 has been designed to accommodate almost all of today's popular microprocessors. It requires only a single 5 V supply and is low power to boot. With a span accommodation down to 180 mV, this 8-bit unit can also replace a 12-bit analog-to-digital dev
  • AN-C V/F Converter ICs Handle Frequency-to-Voltage Needs (Rev. B)
    PDF, 371 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
    Simplify your frequency-to-voltage (F/V) converter designs with versatile V/F ICs. Starting with a basicconverter circuit you can modify it to meet almost any application requirement. You can spare yourselfsome hard labor when designing F/V converters by using a voltage-to-frequency (V/F) IC in your designs.These ICs form the basis of a series of accurate yet economical F/V converters sui
  • AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)
    PDF, 165 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
    It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or
  • Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)
    PDF, 81.7 Mb, Revision: B, Datei veröffentlicht: Apr 22, 2013
    This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
  • AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)
    PDF, 814 Kb, Revision: A, Datei veröffentlicht: May 6, 2013
    The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t

Modellreihe

Herstellerklassifikation

  • Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> General-Purpose Op Amps