Datasheet Texas Instruments LM318-N — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LM318-N |
Operationsverstärker
Datenblätter
LM118/LM218/LM318 Operational Amplifiers datasheet
PDF, 1.6 Mb, Revision: C, Datei veröffentlicht: Mar 20, 2013
Auszug aus dem Dokument
Preise
Status
| LM318M | LM318M/NOPB | LM318MX/NOPB | LM318N/NOPB | |
|---|---|---|---|---|
| Lifecycle Status | NRND (Not recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | No | No | Yes |
Verpackung
| LM318M | LM318M/NOPB | LM318MX/NOPB | LM318N/NOPB | |
|---|---|---|---|---|
| N | 1 | 2 | 3 | 4 |
| Pin | 8 | 8 | 8 | 8 |
| Package Type | D | D | D | P |
| Industry STD Term | SOIC | SOIC | SOIC | PDIP |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G | R-PDIP-T |
| Package QTY | 95 | 95 | 2500 | 40 |
| Carrier | TUBE | TUBE | LARGE T&R | TUBE |
| Device Marking | 318M | LM | 318M | LM |
| Width (mm) | 3.91 | 3.91 | 3.91 | 6.35 |
| Length (mm) | 4.9 | 4.9 | 4.9 | 9.81 |
| Thickness (mm) | 1.58 | 1.58 | 1.58 | 3.9 |
| Pitch (mm) | 1.27 | 1.27 | 1.27 | 2.54 |
| Max Height (mm) | 1.75 | 1.75 | 1.75 | 5.08 |
| Mechanical Data | Herunterladen | Herunterladen | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | LM318M | LM318M/NOPB | LM318MX/NOPB | LM318N/NOPB |
|---|---|---|---|---|
| Additional Features | N/A | N/A | N/A | N/A |
| Architecture | Bipolar | Bipolar | Bipolar | Bipolar |
| CMRR(Min), dB | 70 | 70 | 70 | 70 |
| CMRR(Typ), dB | 100 | 100 | 100 | 100 |
| GBW(Typ), MHz | 15 | 15 | 15 | 15 |
| Input Bias Current(Max), pA | 500000 | 500000 | 500000 | 500000 |
| Iq per channel(Max), mA | 10 | 10 | 10 | 10 |
| Iq per channel(Typ), mA | 4.5 | 4.5 | 4.5 | 4.5 |
| Number of Channels | 1 | 1 | 1 | 1 |
| Offset Drift(Typ), uV/C | 6 | 6 | 6 | 6 |
| Operating Temperature Range, C | 0 to 70 | 0 to 70 | 0 to 70 | 0 to 70 |
| Output Current(Typ), mA | 20 | 20 | 20 | 20 |
| Package Group | SOIC | SOIC | SOIC | PDIP |
| Package Size: mm2:W x L, PKG | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | See datasheet (PDIP) |
| Rail-to-Rail | No | No | No | No |
| Rating | Catalog | Catalog | Catalog | Catalog |
| Slew Rate(Typ), V/us | 70 | 70 | 70 | 70 |
| Total Supply Voltage(Max), +5V=5, +/-5V=10 | 40 | 40 | 40 | 40 |
| Total Supply Voltage(Min), +5V=5, +/-5V=10 | 10 | 10 | 10 | 10 |
| Vn at 1kHz(Typ), nV/rtHz | 15 | 15 | 15 | 15 |
| Vos (Offset Voltage @ 25C)(Max), mV | 10 | 10 | 10 | 10 |
Öko-Plan
| LM318M | LM318M/NOPB | LM318MX/NOPB | LM318N/NOPB | |
|---|---|---|---|---|
| RoHS | See ti.com | Compliant | Compliant | Compliant |
Anwendungshinweise
- Instrumentational Amplifiers (See also LMP8358)PDF, 76 Kb, Datei veröffentlicht: Oct 2, 2002
- Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)PDF, 81.7 Mb, Revision: B, Datei veröffentlicht: Apr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits. - AN-446 A 150W IC Op Amp Simplifies Design of Power CircuitsPDF, 782 Kb, Datei veröffentlicht: May 10, 2004
Application Note 446 A 150W IC Op Amp Simplifies Design of Power Circuits - Building an Op Amp With Bipolar Transistors, A Historical Application Note (Rev. A)PDF, 1.2 Mb, Revision: A, Datei veröffentlicht: Sep 19, 2016
It is well known that the voltage noise of an operational amplifier can be decreased by increasing the emitter currentof the input stage. The signal-to-noise ratio will be improved by the increase of bias, until the base current noise begins to dominate.
Modellreihe
Serie: LM318-N (4)
Herstellerklassifikation
- Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> General-Purpose Op Amps