Datasheet Texas Instruments LM20124 — Datenblatt
Hersteller | Texas Instruments |
Serie | LM20124 |
2,95-5,5 V, 4 A, Synchron-Buck-Regler im aktuellen Modus mit optionaler Fahrzeugqualität
Datenblätter
LM20124/LM20124Q 4A, 1MHz PowerWise В® Synchronous Buck Regulator datasheet
PDF, 1.4 Mb, Revision: F, Datei veröffentlicht: Mar 27, 2013
Auszug aus dem Dokument
Preise
Status
LM20124MH/NOPB | LM20124MHE/NOPB | LM20124MHX/NOPB | |
---|---|---|---|
Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes | No | No |
Verpackung
LM20124MH/NOPB | LM20124MHE/NOPB | LM20124MHX/NOPB | |
---|---|---|---|
N | 1 | 2 | 3 |
Pin | 16 | 16 | 16 |
Package Type | PWP | PWP | PWP |
Industry STD Term | HTSSOP | HTSSOP | HTSSOP |
JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
Package QTY | 92 | 250 | 2500 |
Carrier | TUBE | SMALL T&R | LARGE T&R |
Device Marking | MH | MH | 20124 |
Width (mm) | 4.4 | 4.4 | 4.4 |
Length (mm) | 5 | 5 | 5 |
Thickness (mm) | 1 | 1 | 1 |
Pitch (mm) | .65 | .65 | .65 |
Max Height (mm) | 1.2 | 1.2 | 1.2 |
Mechanical Data | Herunterladen | Herunterladen | Herunterladen |
Parameter
Parameters / Models | LM20124MH/NOPB | LM20124MHE/NOPB | LM20124MHX/NOPB |
---|---|---|---|
Control Mode | Current Mode | Current Mode | Current Mode |
Duty Cycle(Max), % | 85 | 85 | 85 |
Iout(Max), A | 4 | 4 | 4 |
Iq(Typ), mA | 3.5 | 3.5 | 3.5 |
Operating Temperature Range, C | -40 to 125 | -40 to 125 | -40 to 125 |
Package Group | HTSSOP | HTSSOP | HTSSOP |
Rating | Catalog | Catalog | Catalog |
Regulated Outputs | 1 | 1 | 1 |
Special Features | Enable,Power Good,Pre-Bias Start-Up,Synchronous Rectification,Tracking | Enable,Power Good,Pre-Bias Start-Up,Synchronous Rectification,Tracking | Enable,Power Good,Pre-Bias Start-Up,Synchronous Rectification,Tracking |
Switching Frequency(Max), kHz | 1000 | 1000 | 1000 |
Switching Frequency(Min), kHz | 1000 | 1000 | 1000 |
Type | Converter | Converter | Converter |
Vin(Max), V | 5.5 | 5.5 | 5.5 |
Vin(Min), V | 2.95 | 2.95 | 2.95 |
Vout(Max), V | 5 | 5 | 5 |
Vout(Min), V | 0.8 | 0.8 | 0.8 |
Öko-Plan
LM20124MH/NOPB | LM20124MHE/NOPB | LM20124MHX/NOPB | |
---|---|---|---|
RoHS | Compliant | Compliant | Compliant |
Anwendungshinweise
- AN-2077 LM20k POL Module (Rev. A)PDF, 1.3 Mb, Revision: A, Datei veröffentlicht: May 3, 2013
The LM20k is a full-featured synchronous buck switching regulator capable of driving up to 6A of loadcurrent and converting an input voltage between 2.95V and 5.5V down to an output voltage as low as0.8V. Fault protection features include cycle-by-cycle current limit, output power good, and output overvoltageprotection. The dual function soft-start/tracking pin can be used to control the sta - AN-1751 4A LM20k Reference Designs (Rev. A)PDF, 215 Kb, Revision: A, Datei veröffentlicht: May 3, 2013
This application note discusses the design options using the high performance 4A synchronous buckconverters, LM20124, LM20134, and LM20144.
Modellreihe
Serie: LM20124 (3)
Herstellerklassifikation
- Semiconductors> Power Management> Non-isolated DC/DC Switching Regulator> Step-Down (Buck)> Buck Converter (Integrated Switch)