Datasheet Texas Instruments LDC1041NHRJ — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LDC1041 |
| Artikelnummer | LDC1041NHRJ |
8-Bit-Rp, 24-Bit-L-Induktivitäts-Digital-Wandler mit SPI für induktive Sensoranwendungen 16-WSON -40 bis 125
Datenblätter
LDC1041: 8-bit Rp, 24-bit L Inductance-to-Digital Converter with SPI datasheet
PDF, 3.1 Mb, Datei veröffentlicht: Mar 13, 2014
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 16 |
| Package Type | NHR |
| Industry STD Term | WSON |
| JEDEC Code | R-PDSO-N |
| Package QTY | 4500 |
| Carrier | LARGE T&R |
| Device Marking | LDC1041 |
| Width (mm) | 4 |
| Length (mm) | 5 |
| Thickness (mm) | .8 |
| Pitch (mm) | .5 |
| Max Height (mm) | .8 |
| Mechanical Data | Herunterladen |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: LDC1041EVM
LDC1041 Inductance-to-Digital Converter with Sample PCB Coil Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Using Multiple Sensors With LDC1000PDF, 74 Kb, Datei veröffentlicht: Mar 2, 2015
- Configuring Inductive-to-Digital-Converters for Parallel Resistance (RP) Variati (Rev. A)PDF, 255 Kb, Revision: A, Datei veröffentlicht: Jun 1, 2015
This application note reviews sensor RP configuration for LDC devices. LDC1000, LDC1041, LDC1051, LDC1312, LDC1314, LDC1612, LDC1614 are covered in this note. Clear understanding on how to set the RP_MIN and RP_MAX registers is necessary for not only RP measurements, but also for optimum L measurements. The fundamental principle of RP measurements is that magnetic fields from an LC circuit ge - LDC Device Selection Guide (Rev. B)PDF, 360 Kb, Revision: B, Datei veröffentlicht: Mar 21, 2017
- LDC Sensor DesignPDF, 1.0 Mb, Datei veröffentlicht: Mar 24, 2015
Getting the best performance out of an LDC requires a sensor suitable for the measurement. This app-note covers the parameters to consider when designing a sensor for a specific application. Specific areas of focus include the physical routing characteristics of PCB based sensors, considerations for the sensor capacitor, and techniques to minimize or compensate for parasitic effects. - LDC1xxx LDC Target Design (Rev. A)PDF, 907 Kb, Revision: A, Datei veröffentlicht: May 9, 2017
Texas Instruments’ Inductive-to-Digital Converter (LDC) technology can accurately measure with a wide variety of target sizes, shapes, and material composition. There are several target design guidelines to maximize the effectiveness of an LDC measurement system. This application note covers the relevant factors of target design that affect inductive sensing, and provides guide
Modellreihe
Serie: LDC1041 (3)
- LDC1041NHRJ LDC1041NHRR LDC1041NHRT
Herstellerklassifikation
- Semiconductors > Sensing Products > Inductive Sensing > Inductance to Digital Converters