Datasheet Texas Instruments ISO1050 — Datenblatt

Hersteller	Texas Instruments
Serie	ISO1050

Isolierter 5-V-CAN-Transceiver

Datenblätter

PDF, 2.0 Mb, Revision: I, Datei veröffentlicht: Jan 22, 2015

Auszug aus dem Dokument

	ISO1050DUB	ISO1050DUBR	ISO1050DW	ISO1050DWR
Lifecycle Status	Active (Recommended for new designs)	Active (Recommended for new designs)	Active (Recommended for new designs)	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes	Yes	Yes	Yes

	ISO1050DUB	ISO1050DUBR	ISO1050DW	ISO1050DWR
N	1	2	3	4
Pin	8	8	16	16
Package Type	DUB	DUB	DW	DW
Industry STD Term	SOP	SOP	SOIC	SOIC
JEDEC Code	R-PDSO-G	R-PDSO-G	R-PDSO-G	R-PDSO-G
Package QTY	50	350	40	2000
Carrier	TUBE	LARGE T&R	TUBE	LARGE T&R
Device Marking	ISO1050	ISO1050	ISO1050	ISO1050
Width (mm)	6.57	6.57	7.5	7.5
Length (mm)	9.5	9.5	10.3	10.3
Thickness (mm)	3.3	3.3	2.35	2.35
Pitch (mm)	2.54	2.54	1.27	1.27
Max Height (mm)	4.85	4.85	2.65	2.65
Mechanical Data	Herunterladen	Herunterladen	Herunterladen	Herunterladen

Parameters / Models	ISO1050DUB	ISO1050DUBR	ISO1050DW	ISO1050DWR
CSA 60601-1 Reinforced Working, Vrms	125	125	125	125
CSA 60950-1 Basic Working, Vrms	760,730	760,730	760,730	760,730
CSA 60950-1 Reinforced Working, Vrms	380,148	380,148	380,148	380,148
CSA 61010-1 Basic Working, Vrms	600	600	600	600
CSA 61010-1 Reinforced Working, Vrms	300,148	300,148	300,148	300,148
CSA Isolation Rating, Vrms	5000,2500	5000,2500	5000,2500	5000,2500
DIN V VDE V 0884-10 Working Voltage, Vpk	1.2	1.2	1.2	1.2
DIN V VDE V 0884-10 Transient Overvoltage Rating, Vpk	4	4	4	4
Datarate, Mbps	1	1	1	1
Fault Protection, V	-27 to 40	-27 to 40	-27 to 40	-27 to 40
Isolation Rating, Vrms	4.2	4.2	4.2	4.2
Operating Temperature Range, C	-55 to 105	-55 to 105	-55 to 105	-55 to 105
Package Group	SOP	SOP	SOIC	SOIC
Package Size: mm2:W x L, PKG	8SOP: 62 mm2: 6.57 x 9.5(SOP)	8SOP: 62 mm2: 6.57 x 9.5(SOP)	16SOIC: 106 mm2: 10.3 x 10.3(SOIC)	16SOIC: 106 mm2: 10.3 x 10.3(SOIC)
Surge Voltage Rating, Vpk	4	4	4	4
TUV EN 60950-1 Basic Working, Vrms	400	400	400	400
TUV EN 60950-1 Reinforced Working, Vrms	600	600	600	600
TUV EN 61010-1 Basic Working, Vrms	400	400	400	400
TUV EN 61010-1 Reinforced Working, Vrms	600	600	600	600
TUV Isolation Rating, Vrms	5000,2500	5000,2500	5000,2500	5000,2500
UL 1577 Isolation Voltage (Double), Vrms	3.5,2.5	3.5,2.5	3.5,2.5	3.5,2.5
VCC1(Max), V	5.5	5.5	5.5	5.5
VCC1(Min), V	3	3	3	3
VCC2(Max), V	5.25	5.25	5.25	5.25
VCC2(Min), V	4.75	4.75	4.75	4.75

	ISO1050DUB	ISO1050DUBR	ISO1050DW	ISO1050DWR
RoHS	Compliant	Compliant	Compliant	Compliant

Herunterladen
Isolated CAN Reference Design (Rev. C)
PDF, 39 Kb, Revision: C, Datei veröffentlicht: Sep 14, 2018
This design note presents the reference design of an isolated CAN node using the isolated CAN transceiver and a transformer driver SN6505A to generate the isolated power.
Herunterladen
Isolated CAN solution by using ISO1050 and SN6501
PDF, 406 Kb, Datei veröffentlicht: Jan 16, 2013
Herunterladen
Common-Mode Chokes in CAN Networks: Source of Unexpected Transients
PDF, 230 Kb, Datei veröffentlicht: Jan 29, 2008
Common-mode chokes are frequently used in automotive CAN networks to increase system reliability with respect to electromagnetic compatibility (EMC). Electromagnetic interference emitted from an Electronic Control Module (ECU) through the CAN transceiver can be filtered, thus limiting unwanted high-frequency noise on the communication bus. Another reason for using a common-mode choke is attempting
Herunterladen
Isolated RS-485 Reference Design
PDF, 80 Kb, Datei veröffentlicht: Oct 28, 2009
This design note presents the reference designs of isolated RS-485 nodes, using bus voltages of 3.3 V and 5 V. Various transceivers are used to satisfy the requirements for low, medium, and high data rates, as well as to accommodate the need for half- and full-duplex operation.

Serie: ISO1050 (4)