Datasheet Texas Instruments DS92LV090ATVEH/NOPB — Datenblatt

DS92LV090A
www.ti.com SNLS025D – APRIL 2000 – REVISED APRIL 2013 DS92LV090A 9 Channel Bus LVDS Transceiver
Check for Samples: DS92LV090A FEATURES DESCRIPTION The DS92LV090A is one in a series of Bus LVDS
transceivers designed specifically for the high speed,
low power proprietary backplane or cable interfaces.
The device operates from a single 3.3V power supply
and includes nine differential line drivers and nine
receivers. To minimize bus loading, the driver outputs
and receiver inputs are internally connected. The
separate I/O of the logic side allows for loop back
support. The device also features a flow through pin
out which allows easy PCB routing for short stubs
between its pins and the connector. 1 2 Bus LVDS Signaling
3.2 Nanosecond Propagation Delay Max
Chip to Chip Skew В±800ps
Low Power CMOS Design
High Signaling Rate Capability (Above 100
Mbps)
0.1V to 2.3V Common Mode Range for VID =
200mV
В±100 mV Receiver Sensitivity
Supports Open and Terminated Failsafe on
Port Pins …